1. #1
    Hi I've purchased a new machine with a Leetro MPC6610 DSP controller. I'm using Vcarve to generate the G-code.
    I have a small query. Altering the settings for the spindle speed and feed speed don't appear to make any difference. Is this due to the post processor?
    At present I am just selecting the basic G-code post processor.

    Thanks for any help.


  2. #2
    Try the Mach2-3 arcs mm one and see what that spits out.
    John S -

  3. #3
    Quote Originally Posted by John S View Post
    Try the Mach2-3 arcs mm one and see what that spits out.
    I think you are correct John, perhaps trial and error is the best option.

    To be fair, I have now got hold of the manual for the controller and you can change the feed rates and spindles speeds "on the fly" anyway, so the problem has sort of gone anyway although it would still be nice to be able to specify the values in Vcarve.

Similar Threads

  1. Help with Post Processor
    By superpot in forum CAD & CAM Software
    Replies: 0
    Last Post: 20-11-2013, 10:23 AM
  2. Google Sketchup >> Vectric VCarve
    By kingcreaky in forum Computer Software
    Replies: 9
    Last Post: 09-03-2013, 06:42 PM
  3. Post processor Sei
    By 2006Nobull in forum Machine Discussion
    Replies: 12
    Last Post: 04-08-2011, 11:58 AM
  4. Vectric wins the Queen's Award !
    By Lee Roberts in forum Vectric
    Replies: 0
    Last Post: 23-04-2010, 08:53 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts