Hi, anyone got any toolholders for the 190VMC going spare? They are Coventry 'Easy Change' type. I can buy new but at £70 each plus VAT they aren't cheap.
I also want to fit a tool changer so if anyone has one or any bits or any info I'd be grateful. I might need to make my own if I can't find anything.
Finally anyone got any manuals in any form, PDF, paper, slate, wood :lol:
Any expenses reimbursed with pleasure.
I have a 190VMC with toolchanger...
I might be tempted to sell the toolchanger for the right price... I don't have the original boards any more as mine is converter to Mach3 (including the toolchanger)
I have the wiring diagram for the 190 in JPG format.
I have a paper copy of the Student manual
I have electronic (PDF) copies of the user and programming manual
If there is anything you want, Send me a mail and I'll send you the docs..
Just got a 190VMCi and saw your post
If you have the PDF manual and Wiring diags in jpg can you email them to me at firstname.lastname@example.org
Ta alot, its a good job this place exists or these projects would be very very hard.
I have just a week the 165HMC and wonder, if the spindles of the 2 machines are identical.
Boxford itself said, they haven't any drawings, partslist, manuals from the machine, but if anyone have drawings of the spindle outer contour, than I can see, if the measures are the same.
If yes, I hope Boxford will sell me a spindle, I can change against the Easy-Change spindle with
toolholders and the easychange adapter with fast clamp.
I prefer SK/BT30 because the toolholders are much cheaper than the easy-change parts.
That's always the same with specific parts from only one manufacturer.
By GeoffV in forum Boxford Vertical MillsReplies: 38Last Post: 28-01-2016, 09:49 PM
By suesi34e in forum Machine DiscussionReplies: 16Last Post: 27-03-2014, 09:26 PM
WANTED: EMCO Lathe Tool ChangerBy Pete92 in forum Items WantedReplies: 0Last Post: 01-10-2013, 09:27 AM
By amen23 in forum Tool & Tooling TechnologyReplies: 4Last Post: 06-01-2009, 04:56 AM