. .
  1. #1
    Hi, anyone got any toolholders for the 190VMC going spare? They are Coventry 'Easy Change' type. I can buy new but at £70 each plus VAT they aren't cheap.

    I also want to fit a tool changer so if anyone has one or any bits or any info I'd be grateful. I might need to make my own if I can't find anything.

    Finally anyone got any manuals in any form, PDF, paper, slate, wood :lol:

    Any expenses reimbursed with pleasure.

    TIA

    David

  2. #2
    I have a 190VMC with toolchanger...
    I might be tempted to sell the toolchanger for the right price... I don't have the original boards any more as mine is converter to Mach3 (including the toolchanger)
    I have the wiring diagram for the 190 in JPG format.
    I have a paper copy of the Student manual
    I have electronic (PDF) copies of the user and programming manual

    If there is anything you want, Send me a mail and I'll send you the docs..

    Thanks
    Simon

  3. #3
    Hi
    Just got a 190VMCi and saw your post
    If you have the PDF manual and Wiring diags in jpg can you email them to me at [email protected]
    Ta alot, its a good job this place exists or these projects would be very very hard.

    JCS



    Quote Originally Posted by SimonD View Post
    I have a 190VMC with toolchanger...
    I might be tempted to sell the toolchanger for the right price... I don't have the original boards any more as mine is converter to Mach3 (including the toolchanger)
    I have the wiring diagram for the 190 in JPG format.
    I have a paper copy of the Student manual
    I have electronic (PDF) copies of the user and programming manual

    If there is anything you want, Send me a mail and I'll send you the docs..

    Thanks
    Simon

  4. #4
    Hi SimonD,

    Do you still have the 190VMC Toolchanger? Where are you based? Do you have any pics?

    Thanks and kind regards

    Simon Jackson

    Quote Originally Posted by SimonD View Post
    I have a 190VMC with toolchanger...
    I might be tempted to sell the toolchanger for the right price... I don't have the original boards any more as mine is converter to Mach3 (including the toolchanger)
    I have the wiring diagram for the 190 in JPG format.
    I have a paper copy of the Student manual
    I have electronic (PDF) copies of the user and programming manual

    If there is anything you want, Send me a mail and I'll send you the docs..

    Thanks
    Simon

  5. #5
    I have just a week the 165HMC and wonder, if the spindles of the 2 machines are identical.
    Boxford itself said, they haven't any drawings, partslist, manuals from the machine, but if anyone have drawings of the spindle outer contour, than I can see, if the measures are the same.
    If yes, I hope Boxford will sell me a spindle, I can change against the Easy-Change spindle with
    toolholders and the easychange adapter with fast clamp.
    I prefer SK/BT30 because the toolholders are much cheaper than the easy-change parts.
    That's always the same with specific parts from only one manufacturer.

  6. #6
    Quote Originally Posted by SimonD View Post
    I have a 190VMC with toolchanger...
    I might be tempted to sell the toolchanger for the right price... I don't have the original boards any more as mine is converter to Mach3 (including the toolchanger)
    I have the wiring diagram for the 190 in JPG format.
    I have a paper copy of the Student manual
    I have electronic (PDF) copies of the user and programming manual

    If there is anything you want, Send me a mail and I'll send you the docs..

    Thanks
    Simon
    Hello;

    hope u will be fine. i am Navid Ali and lecturer in technical college in Pakistan. we have the same machine but software is missing. if you can provide the manuals and wiring diagram i will be grateful.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Boxford 190vmc upgrade
    By GeoffV in forum Boxford Vertical Mills
    Replies: 41
    Last Post: 13-06-2018, 07:46 PM
  2. Replies: 16
    Last Post: 27-03-2014, 10:26 PM
  3. WANTED: EMCO Lathe Tool Changer
    By Pete92 in forum Items Wanted
    Replies: 0
    Last Post: 01-10-2013, 10:27 AM
  4. Automatic tool changer
    By amen23 in forum Tool & Tooling Technology
    Replies: 4
    Last Post: 06-01-2009, 05:56 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •