. .
Page 3 of 3 FirstFirst 123
  1. #21
    Quote Originally Posted by blackburn mark View Post
    jazz, maybe in future "you" will be more mindful and PM the people that you want to tare a strip from... besides that i think we are all open to critisism if its unagressive and done without an air of superiority.

    i also appologise Justin for my part in hijacking this thread.
    Ok Mark, first I didn't tare strips and neither was I aggresive. Also I can't help it if you take confidense gained with experience and twist it into something else like superiosity.

    Thou I will take your critisism on board and if feel the need directly PM folks warning of bullshit posters.

    I'm leaving it here now. . good night.!

  2. #22
    If you are not bothered about weight, why don't you buy an old machine and fit new drives and electronics. i would have thought you are more likely to achieve the level of accuracy you require.

  3. #23
    Quote Originally Posted by Colin Barron View Post
    If you are not bothered about weight, why don't you buy an old machine and fit new drives and electronics. i would have thought you are more likely to achieve the level of accuracy you require.
    I have trawled in the interweb for hours on end looking for 2nd hand cnc machines, and not had a great deal of joy.

  4. #24

  5. #25
    Quote Originally Posted by Colin Barron View Post
    That is slightly too large. I have another plan in progress which is to make the base out of concrete and the rails out of epoxy granite and all so that it can be dismantled easily.

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: Steel frame cnc router design/build
    By CraftyGeek in forum DIY Router Build Logs
    Replies: 110
    Last Post: 06-05-2015, 10:00 PM
  2. Replies: 41
    Last Post: 08-02-2014, 11:37 PM
  3. expanding foam and steel frame
    By Gytis in forum Metalwork Discussion
    Replies: 11
    Last Post: 18-08-2013, 10:35 AM
  4. BUILD LOG: 7' X 4' Steel frame build
    By Ricardoco in forum DIY Router Build Logs
    Replies: 6
    Last Post: 28-10-2012, 06:02 PM
  5. What frame bed and where to buy?
    By icedfusion in forum Machine Discussion
    Replies: 11
    Last Post: 13-01-2012, 06:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •