. .
  1. #1
    Hi,

    I am trying to find a source of self levelling epoxy resin which I can use to mount linear guide rails on, but I have not been able to find a suitable product here in the uk ?

    If you know of anything that would be suitable pleas do let let me know.

    Thanks

  2. #2
    Try these guys: http://www.wessex-resins.com/westsystem/
    I've found them very helpful. They sell liquid resin and all sorts of fillers so you can make your own mix. They should be able to advise you as to the best mixture to use.

    Russell.

  3. #3
    Simply you can get it anywhere from amazon or ebay.

  4. #4
    The most common system recommended for this job is West Systems resin type 105 with the type 209 very slow hardener. Check out the build logs for details of how it should be used.
    An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.

  5. #5
    Quote Originally Posted by Mickey_Smith View Post
    Simply you can get it anywhere from amazon or ebay.
    Quote Originally Posted by Kitwn View Post
    The most common system recommended for this job is West Systems resin type 105 with the type 209 very slow hardener. Check out the build logs for details of how it should be used.
    Both of you do realise this thread is nearly 10yrs old and I'm pretty sure he's found some by now...
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk

  6. #6
    Fancy letting myself get caught out by that one!

    There may be one modern reader somewhere who found the info useful, so I'm not too upset
    An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Epoxy granite or mineral casting
    By mike mcdermid in forum Gantry/Router Machines & Building
    Replies: 46
    Last Post: 20-02-2014, 06:21 PM
  2. Epoxy Granite Molds?
    By gavztheouch in forum Moulding Machines
    Replies: 8
    Last Post: 18-02-2014, 07:28 PM
  3. Epoxy pouring advice
    By cncJim in forum General Discussion
    Replies: 12
    Last Post: 18-02-2014, 05:25 PM
  4. Epoxy cast plastic injection tools
    By gavztheouch in forum Moulding Machines
    Replies: 0
    Last Post: 27-01-2014, 11:33 PM
  5. BUILD LOG: Vertical fixed gantry. Design & build. (Steel/epoxy)
    By Greeny in forum DIY Router Build Logs
    Replies: 8
    Last Post: 19-08-2013, 08:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •