. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Hi I am clearing out some of my old parts from my stash to raise funds for a new DIY laser cutter build.
    Here I have for sale 4 sets of 400w panasonic ac brushless servo motors and drives.

    The drives can be configured to run off step and direction making them usefull for a mach 3 based machine.

    Price for all 4 drives and motors including all cables and interface software is £1000. I would like to keep these as a set as I only have one cable to configure the drives.

    Anyone intrested drop me an email for further details.

    Cheers
    Gavin

  2. #2
    What's the part number of the servos and drivers?

  3. #3
    Hi Jonathan

    All motors are MUMS042A1COS

    There are two different servo drives, 2 of each. They are.

    2 * MUDS043A1A
    2 * MSDA043A1A

    Encoders are 2500P/r

    Hope this helps,

    Cheers

    Gav

    Click image for larger version. 

Name:	P1020638.jpg 
Views:	585 
Size:	55.4 KB 
ID:	5118

  4. #4
    forgot to mention the shaft diameter is 14mm on all motors

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CNCdrive.com Cheap Servo drives
    By BillTodd in forum Marketplace Discussion
    Replies: 2
    Last Post: 13-06-2017, 11:38 AM
  2. Servo drives and RCDs
    By m_c in forum Motor Drivers & Controllers
    Replies: 0
    Last Post: 29-06-2013, 12:12 AM
  3. 400W servo - Leadshine ACS806 + ACM604V60 driver - PSU size?
    By dsc in forum Stepper & Servo Motors
    Replies: 10
    Last Post: 23-04-2013, 05:33 PM
  4. Using RC Brushless motors as spindle
    By Jonathan in forum Brushless Spindles & Motors
    Replies: 30
    Last Post: 20-12-2012, 08:51 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •