. .
Page 2 of 2 FirstFirst 12
  1. #11
    Quote Originally Posted by JAZZCNC View Post
    Looks like your worring about nothing there James.!!
    Now it is fixed down, yes that's shown there's nothing to worry about.

    Quote Originally Posted by JAZZCNC View Post
    On another note.!. . . Are you going to lift those spindle brackets further up the front plate, basicly so the collet just clears the bottom of plate so your not wasting clearence height.?
    Don't see the point as the height of the bed is adjustable, and doing that would mean the Z-axis would generally operate further down, which is weaker unless you compensate by putting the bed higher but I suspect it is already at the limit? Also if the collet just clearly the Z-axis could get in the way/collide with a large 3D part when cutting low down.
    Last edited by Jonathan; 30-12-2011 at 12:36 PM.

  2. #12
    Quote Originally Posted by Jonathan View Post
    Don't see the point as the height of the bed is adjustable, and doing that would mean the Z-axis would generally operate further down
    Ah ah thought it was strange having all that Z axis travel and so little clearence didn't know the bed was adjustable, doesn't look it from the Vid. I should probably payed more attention to the rest of the thread!! . . . . ME BAD.:confused: . . In that case forget what I said.:rofl:

  3. #13
    2007, and I thought my build took a long time :lol:

  4. #14
    Very Funny

    I broke my camera the other week and only have a Car Video camera (the one's of ebay for £20.00) and it's ok for the quick up load and plus I can't read Chinese to change the date settings.

    I have a video camera but no cables to get it from video to computer (it's Hi8 I think) I have ordered a set of cables today from ebay

    well I've screwed the Machine down now and just waiting to pick up some corner brackets from Jonathan on Saturday My software has arrived so I should get that running tonight

    So I should be cutting by Sunday/Monday

    James

  5. #15
    James just sounds like excuses to me?? just get out there and cut something before we all burst for gods sake??? blowing air cuts nothing :tup:
    If the nagging gets really bad......Get a bigger shed:naughty:

  6. #16
    Quote Originally Posted by 2e0poz View Post
    blowing air cuts nothing :tup:
    So what are all the tools you attach to an air compressor for then [insert suitable smiley here]

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Do I need to insulate a shed floor?
    By Philly in forum Workshop & Equipment
    Replies: 4
    Last Post: 06-06-2014, 07:33 AM
  2. Fixing linear rail - DIY practice
    By CharlesJenkinson in forum Rails, Guideways & Bearings
    Replies: 1
    Last Post: 10-02-2014, 12:53 PM
  3. wall cnc like the wall saw
    By crossleymarko in forum Machine Discussion
    Replies: 10
    Last Post: 25-03-2012, 11:24 AM
  4. Reading and fixing Chinese scales
    By irving2008 in forum Tool & Tooling Technology
    Replies: 26
    Last Post: 24-02-2010, 10:35 PM
  5. CNC Wall art from JPG
    By BJ- in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 29-01-2010, 03:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •