1. Hello

    My farther in law is in need a part making on a small production run of about 200 to start with. Ideally would be made from steel but would be ok in aluminium. I have made a prototype but making them by hand would be just too time consuming.

    I have got drawings but the picture shows enough to say if it could be done or not. The bar is approximately 32mm and is each is about 15mm in length. As you can see, it has a central hole 4mm through, countersunk 8mm with an off centre hole (on a 10mm pcd) of 3mm through. It also has 4mm milled from the top front face to half way.

    Is anyone setup for a run of 200 units or do you know of anyone we could even try?

    Cheers, Chris


  2. #2
    Can you supply me with the actual cad drawings and i will have a word with my pal

Similar Threads

  1. RFQ: Small sized Parts need making, small batches
    By Ptee in forum Projects, Jobs & Requests
    Replies: 3
    Last Post: 17-01-2014, 05:07 PM
  2. RFQ: Very simple small part
    By Shinobiwan in forum Projects, Jobs & Requests
    Replies: 5
    Last Post: 11-01-2013, 12:02 AM
  3. My wife has a request
    By luke11cnc in forum Tool & Tooling Technology
    Replies: 7
    Last Post: 11-12-2011, 01:45 AM
  4. FOR SALE: Bridgeport x and y traverse units
    By Philmollatt in forum Items For Sale
    Replies: 2
    Last Post: 18-11-2009, 05:35 PM
  5. Request for two small steel rod-esque lathed part!
    By HankMcSpank in forum General Discussion
    Replies: 42
    Last Post: 29-06-2009, 01:32 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts