Thread: Setting up stepper motor drivers
Threaded View
-
24-09-2012 #17
Hi John,
I bought C2 ground ballscrews, to replace leadscrew and cross slide, on ebay , then made a backing plate, that replaces the rack, to hold the ballscrew brackets.
I have since sold the lathe but the new owner did not want the CNC kit so if you are interested i have the ballscrews for both X & Z axis as well as the brackets to fit. the only thing still to do is to make the Ballnut carrier for the saddle.
regards RoyRegards,
Roy Stark
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
3 wire stepper motor drivers?
By m_c in forum Stepper & Servo MotorsReplies: 0Last Post: 17-08-2013, 10:01 PM -
Purelogic featured stepper motor drivers PLD86 and PLD545.
By Purelogic R&D in forum Manufacturer NewsReplies: 0Last Post: 07-06-2012, 08:36 AM -
Total novice seeks advice on stepper motor drivers
By R.Andersen in forum Motor Drivers & ControllersReplies: 1Last Post: 25-01-2012, 11:34 AM -
eBay Stepper Motor Drivers from China
By Mad Professor in forum General ElectronicsReplies: 6Last Post: 20-07-2009, 10:54 PM
Bookmarks