Page 2 of 2 FirstFirst 12
  1. #11
    Autocad can do that but not sure about any others?
    If the nagging gets really bad......Get a bigger shed:naughty:

  2. #12
    Quote Originally Posted by 2e0poz View Post
    Autocad can do that but not sure about any others?
    found this prog " Aide PDF to DXF Converter " that I already had, does it ok but plans are not to clever so i'm getting a lot of unwanted vectors, all good for the learning curve !!

  3. #13
    Try this one. Its free and is supposed to be quite accurate.

    http://www.pdftodxf.com/

    Bruce
    The more I know, I know, I know the less. (John Owen)

  4. #14
    Quote Originally Posted by tonyken View Post
    Hi All, been reading and learning a lot on this site for quite a while, I built an mdf cnc last year and like most people got hooked and needed to build a better one. I decided to go with a fixed gantry this time and it looks like it will be a lot more stable than my previous moving gantry model. slightly larger footprint is small price to pay.
    I used 1"x3" coated mdf for this one ,I have used the 3.1Nm Nema23 439oz stepper motors and TB6560 Driver board from 1st machine.



    I would like to thank all the people on this site for the helpfull information I have gained.
    Cheers, Tony.

    hi there Tony I am new to cnc and i built a cnc router and i also used the TB6560 board, can you tell me how you configured this board as i am at my wits end.
    p.s i have not altered the board in anyway it is as delivered.

    Attachment 5400Attachment 5401
    hi there Tony I am new to cnc and i built a cnc router and i also used the TB6560 board, can you tell me how yo configured this board as i am at my wits end.
    p.s i have not altered the board in anyway it is as delivered.

  5. #15
    Quote Originally Posted by forbesbrb View Post
    hi there Tony I am new to cnc and i built a cnc router and i also used the TB6560 board, can you tell me how yo configured this board as i am at my wits end.
    p.s i have not altered the board in anyway it is as delivered.
    Hi there, I would love to help you out on this and will gladly do that when I get out of hospital, been in 3 weeks now with a heart attack and am having a double bypass op next monday.
    When I get out I will be back in touch with any help I can give.
    Regards, Tony

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Pilz Relay info
    By manofgresley in forum General Electronics
    Replies: 5
    Last Post: 08-05-2014, 10:16 PM
  2. NEW MEMBER: Hello from Ireland..........Need info....
    By aquila787 in forum New Member Introductions
    Replies: 6
    Last Post: 10-09-2012, 10:09 PM
  3. Software info
    By Web Goblin in forum CAD & CAM Software
    Replies: 5
    Last Post: 09-01-2011, 05:41 PM
  4. Info request and possible links
    By CNCBlug in forum General Discussion
    Replies: 10
    Last Post: 15-12-2009, 08:34 PM
  5. Info on V23
    By m.marino in forum CAD & CAM Software
    Replies: 1
    Last Post: 14-10-2009, 09:18 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •