. .
  1. #1
    As title really for an X axis upgrade.

    These are the mounts in question:

    http://www.zappautomation.co.uk/fk20...l?cPath=11_136

    And I need 80x40 profile machining to fit these including 4x tapped holes per mount. There's a total of 2x FK on one section of 1.2m long 80x40 and 2x FF on the another.

    I don't have the equipment or know how to pull this off with confidence. Would be great if I could find someone local as I could drop the parts off with you. Will pay for your time.

    Thanks
    Ant

  2. #2
    Hi mate, could you not get away with a bore in the profile, then make a plate you could fix the FK mounts to, then fix the plate to the profile ?

    Just noticed no one had replyed to you thats all, i'm thinking it maybe a better way to go as well, fixing the FK's to the profile maybe a little tricky and not necessarily the securest way of going about it, i say that with out knowing the wall thickness for your profile.

    .Me
    .Me

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 38
    Last Post: 31-12-2012, 02:42 PM
  2. supports for ballscrews
    By leadinglights in forum Lead Screws, Nuts & Supports
    Replies: 2
    Last Post: 27-04-2010, 12:31 PM
  3. Machining Ballscrews with a mini lathe (& ballscrew support questions)
    By HankMcSpank in forum Lead Screws, Nuts & Supports
    Replies: 15
    Last Post: 16-02-2010, 12:22 AM
  4. Ballscrew machining details
    By HiltonSteve in forum Lead Screws, Nuts & Supports
    Replies: 9
    Last Post: 24-07-2009, 04:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •