Stepper Drivers + PSU's

[Shinobiwan]

Hi

I have a few Switch Mode Power Supplies pulled from a new machine that I've upgraded. A few hours use only. All PSU's are 230v input, have cooling fan installed, are CE certified and are housed in a metal casing.

36v 11A (400w) with voltage adjust pot for approx 36 +/-4v adjustment range £20
48v 7.8A (350w) with voltage adjust pot for approx 48 +/-5v adjustment range £20
60v 8.3A(500w) with voltage adjust pot for approx 60 +/-5v adjustment range £20

For a rough idea of how these look they're similar to this model but with a fan in the top:

http://www.cnc4you.co.uk/index.php?r...&product_id=33

All prices are +postage or your welcome to collect from Chesterfield, Derbyshire. Have paypal too if needed. Also have ebay account with 900+ positive feedback in case my low post count is off putting. JazzCNC might vouch for me too if he's in good mood.