. .
Page 2 of 5 FirstFirst 1234 ... LastLast
  1. #11
    usb.org
    Click "Developers"
    Click "two option" link in "Getting a vendor ID"
    Click the third of the two options, ""vendor ID" no logo licence
    Gets you here...
    http://www.usb.org/developers/vendor...h_02042009.pdf

    First paragraph includes the restriction

    Paragraph 2, the admin fee, results in the Yorksire War Cry...

    'Ow much?

  2. The Following User Says Thank You to Robin Hewitt For This Useful Post:


  3. #12
    please help me.. i have been working on pic18f4550 for making a usb to parallel port ,,, i saw a hope after looking this thread...

    due to cost reasons i can stick to pic18f4550 only...

    the firmware and software links are dead please update ,,some one help :( :( !!!!!
    ...
    there are some more doubts regarding this thread,after i program the micro controller and make all driver loading will my computer will detect it as LPT ? (as printer port in device manager like that of desktop systems)if know that how will be able to access the DB29 port?

    :( :( i am in an urgent need of help... i will be very thank ful; :)

    rony

  4. Quote Originally Posted by ronmalfred123 View Post
    please help me.. i have been working on pic18f4550 for making a usb to parallel port ,,, i saw a hope after looking this thread...

    due to cost reasons i can stick to pic18f4550 only...

    the firmware and software links are dead please update ,,some one help :( :( !!!!!
    ...
    there are some more doubts regarding this thread,after i program the micro controller and make all driver loading will my computer will detect it as LPT ? (as printer port in device manager like that of desktop systems)if know that how will be able to access the DB29 port?

    :( :( i am in an urgent need of help... i will be very thank ful; :)

    rony
    I am afraid CNCDudeZ website is down and hasnt been updated for a while. You could try PM'ing CLaNZeR (CNCDudeZ) direct but he's not been around for a while and I don't think he supports this project any more.

    Moderators

  5. Hi welcome back Sean... Google was reporting the .co.uk site as off the air earlier today when i tried it...said their last cache was the 14th December..

  6. #15
    Hey welcome back Sean and when you popin in for this cup of tea on the way through Swindon?

    Paul
    If the nagging gets really bad......Get a bigger shed:naughty:

  7. Quote Originally Posted by CLaNZeR View Post
    Have spent the holiday working on the Caliper Hack as I notice a few guys have been playing with it also on another thread.
    I hope to use it for PWM on solenoids driving a X'Y table using air pistons and hope to get it pretty precise.
    Which thread is that Sean?

  8. Yes, i saw...
    Last edited by Lee Roberts; 26-03-2019 at 10:26 PM.

  9. #18
    No worries Sean good to hear you still about.
    If the nagging gets really bad......Get a bigger shed:naughty:

  10. #19
    Hello Lee,
    i'm currently working on a software that should control 4 motors for a wire machine using our software, see the software here

    we really would like to sell the software with a dedicated hardware for controlling the 4 stepper and the question is
    if your development could be used as a starting point for this and how much it would cost.
    As you can see, we need 4 motor axis direction control, and we could use some others i/o for heating the wire and limit control.
    if you have interest in this project please contact me at [email protected]
    Thank you for your time
    Last edited by Lee Roberts; 26-03-2019 at 10:28 PM.

  11. #20
    In the first place happiness for their project. I am a student that I would like to carry out this badge USB. The problem is that my parallel port is different and therefore I cannot make it. My parallel port is the following one:

    Pin1 X Step
    Pin2 Y Enable
    Pin3 Y Dir
    Pin4 Z Dir
    Pin5 Z Step
    Pin6 Z Enable
    Pin7 X Dir
    Pin8 Y Step
    Pin9 spindle MOTOR
    Pin10 X Home
    Pin11 Y HOME
    Pin12 Z HOME
    Pin13 EStop
    Pin14 X ENABLE
    Pin15 EXPAND
    Pin16 EXPAND
    Pin17 EXPAND
    Pin18 to Pin25 GND

    The Firmware could send me for the PIC 18F4550.

    THANK YOU




  12. The Following User Says Thank You to JAVIER For This Useful Post:


Page 2 of 5 FirstFirst 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What is the function of a parallel port breakout board?
    By hbx in forum Machine Control Software
    Replies: 13
    Last Post: 12-03-2013, 06:18 PM
  2. Stepper motor drive using mach3 from parallel port
    By hmarwat370 in forum General Electronics
    Replies: 0
    Last Post: 04-02-2013, 08:55 AM
  3. parallel port address
    By Dan Brown in forum Artsoft Mach (3 & 4)
    Replies: 6
    Last Post: 07-01-2010, 12:04 PM
  4. Laptop, ie no parallel port?
    By tompsky in forum Laptops & Tablets
    Replies: 3
    Last Post: 11-11-2008, 07:12 PM
  5. Which USB parallel port emulator is the best
    By bruce_miranda in forum General Electronics
    Replies: 1
    Last Post: 18-09-2008, 03:38 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •