Here is for sell my Boxford 125TCL CNC lathe. All electronic replace with modern control (Gueko Drives)
RPM controlled via PWM.
comes with QCTP + 4 holders
Looking for £500.00 or could exchange / part exchange for an Orac / easyturn (see my post in WANTED section)
HI Laurent is the lathe still with you.
All mods are electronic.
I removed the original control panel, replaced all the original electronic (exept the spindle control board) with modern drivers.
Added a BOB to connect to a standard Parallel port of a PC.
I'll post pictures ASAP. No problem!.
£500 still fine...
interested in this, I don't supose you have any video of it working and what it would be like cutting aluminium?
It does cut alluminium no problem... Unfortunatly I do not own any video camera... :-(
But then again, I am sure if you do a UTube search on Boxford 125TCL you'll find something! It is a very popular little lathe...
Here is one:
Last edited by rnr107; 22-06-2012 at 05:38 PM.
REBUILD: Boxford 125TCLBy Roadrunna in forum Lathe Rebuild LogsReplies: 4Last Post: 23-08-2014, 04:15 PM
By dragon in forum Items WantedReplies: 1Last Post: 12-06-2013, 01:32 PM
By dragon in forum Boxford LathesReplies: 0Last Post: 14-03-2013, 09:10 PM
WANTED: Boxford 125TCL Chuck WantedBy JAZZCNC in forum Items WantedReplies: 8Last Post: 31-01-2013, 11:51 PM
WANTED: Boxford 125TCL Tool holder?By Minnican in forum Items WantedReplies: 2Last Post: 16-02-2011, 08:22 PM