Boxford 125TCL Ugraded to Mch3 - fully working

[rnr107]

Hi all,
Here is for sell my Boxford 125TCL CNC lathe. All electronic replace with modern control (Gueko Drives)
RPM controlled via PWM.
comes with QCTP + 4 holders

Looking for £500.00 or could exchange / part exchange for an Orac / easyturn (see my post in WANTED section)

Ta,
Laurent

[MAW]

HI Laurent is the lathe still with you.

Mark

[rnr107]

HI Laurent is the lathe still with you.

Mark

Hi Mark,
Yes, the lathe still with me... :-)

Laurent

[Chirpy]

Hi Mark,
Yes, the lathe still with me... :-)

Laurent

Hi Laurent,
Only seen this today, is it still with you?
John

[rnr107]

Hi Laurent,
Only seen this today, is it still with you?
John

Hi John,
Yes, still with me... :-)

Laurent

[Chirpy]

Hi John,
Yes, still with me... :-)

Laurent

Hi Laurent,
Can you forward details of modifications, any pictures etc and use to which you have used the lathe.
Are you still looking for circa £500?
Many thanks
John

[craigrobbo]

interested in this, I don't supose you have any video of it working and what it would be like cutting aluminium?

[rnr107]

interested in this, I don't supose you have any video of it working and what it would be like cutting aluminium?

Hi Craig,
It does cut alluminium no problem... Unfortunatly I do not own any video camera... :-(
But then again, I am sure if you do a UTube search on Boxford 125TCL you'll find something! It is a very popular little lathe...

Here is one:
http://www.youtube.com/watch?feature...&v=pgAdO5TLDN0

Laurent

[i2i]

i've had a few of these lathes, and for their size they are very capable machines and will machine ally with no problems at all. Considering the amount of mods on this 125 it's a steal at £500.

[cooliced]

Laurent

How are you chap, i swapped this with you for the Sherline mill..

What did you do with the electronics?

Good look with sale, i would defiantly have this back if it were capable of bigger things