. .
  1. 09-04-2012 #1
    ciaranconlon's Avatar
    Lives in belfast, United Kingdom.
    ciaranconlon
    Last Activity: 07-01-2013 Has been a member for 9-10 years. Has a total post count of 3.
    hi there
    had 3 of the TB6560 blue boards and kept blowin lumps out of the chips so decided to upgrade bought ZP5A-INT breakout board (5 axis)and 4 M542 stepper drivers of ebay

    all wired up to a new nema23, NO GO
    tried a nema 34 still NO go
    my power supply is a 24V 12a

    any ideas

    i no i should of just got a new kit from ZAPP automation
    Reply With Quote Reply With Quote
  2. 09-04-2012 #2
    John S's Avatar
    Lives in Nottingham, England, United Kingdom.
    John S
    Last Activity: 23-09-2017 Has been a member for 9-10 years. Has a total post count of 2,073. Received thanks 140 times, giving thanks to others 45 times. Referred 1 members to the community.
    Read the ZP5A setup instructions, they use for wierd pin layouts, not 23 for one axis, 45 for another.
    John S -
    Reply With Quote Reply With Quote

  3. The Following User Says Thank You to John S For This Useful Post:

  4. 09-04-2012 #3
    Ekfer's Avatar
    Lives in Miami, United States.
    Ekfer
    Last Activity: 26-06-2019 Has been a member for 9-10 years. Has a total post count of 16. Received thanks 1 times, giving thanks to others 0 times.
    Click image for larger version.  Name: MISCELLANEOUS EKF CNC PROJECT SLIDES.jpg  Views: 6580  Size: 101.2 KB  ID: 5697I have the same board and drives. This picture shows how I'm making the connections. Perhaps this will help. Take care
    Reply With Quote Reply With Quote

  5. The Following User Says Thank You to Ekfer For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. M542 driver - motor vibration at low speeds
    By birchy in forum Motor Drivers & Controllers
    Replies: 34
    Last Post: 22-11-2013, 08:16 PM
  2. M542 driver (Zapp) half or full current?
    By Smiler in forum Stepper & Servo Motors
    Replies: 9
    Last Post: 09-07-2013, 09:02 PM
  3. M542 problems see pictures
    By ciaranconlon in forum Motor Drivers & Controllers
    Replies: 18
    Last Post: 08-01-2013, 08:37 PM
  4. Stepper Driver / PSU / Breakout board Wiring ?
    By manofgresley in forum General Electronics
    Replies: 2
    Last Post: 16-08-2012, 05:41 PM
  5. M542 Driver
    By Swarfing in forum Motor Drivers & Controllers
    Replies: 28
    Last Post: 28-06-2012, 09:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules