Page 33 of 52 FirstFirst ... 23313233343543 ... LastLast
  1. #321
    Ingenuity at its best
    ..Clive
    The more you know, The better you know, How little you know

  2. The Following User Says Thank You to Clive S For This Useful Post:


  3. #322
    Bloody hell Jo that would have tickled bit if that blade caught collet spun up . . . . .

  4. The Following User Says Thank You to JAZZCNC For This Useful Post:


  5. Haha yep just finishing it now and that thought did cross my mind. But the only thing touching the saw blade is the bushing so I figure it's safe enough!?

  6. Routing finished!

  7. OK folks, finally finished the NEMA 34 mount tonight. Pleased with it, and quite pleased with the final video I've made about making it! No more routing with the circular saw blade now Jazz, I promise! https://youtu.be/nbmGCuirTy4


    Sent from my iPhone using Tapatalk

  8. #326
    Quote Originally Posted by JoeHarris View Post
    OK folks, finally finished the NEMA 34 mount tonight. Pleased with it, and quite pleased with the final video I've made about making it! No more routing with the circular saw blade now Jazz, I promise! https://youtu.be/nbmGCuirTy4


    Sent from my iPhone using Tapatalk
    Joe nice vid, Are you sure that the motor is seating in the mount properly I am not sure but it looks like there is a gap between the face of the motor and the mount.
    ..Clive
    The more you know, The better you know, How little you know

  9. Thanks eagle eyes! There is a intentional gap (about 1mm) between the bit that sticks out around the shaft in the motor and the back of the mount but the face of the motor sits firmly against the mount.


    Sent from my iPhone using Tapatalk

  10. For anyone interested I have uploaded another short video showing some z axis progress to YouTube: https://youtu.be/nBGU28XVHdA

  11. The Following User Says Thank You to JoeHarris For This Useful Post:


  12. #329
    I love your videos, you are a great inspiration

  13. The Following 2 Users Say Thank You to Nr1madman For This Useful Post:


  14. Quote Originally Posted by Nr1madman View Post
    I love your videos, you are a great inspiration
    Thanks!


    Sent from my iPhone using Tapatalk

Page 33 of 52 FirstFirst ... 23313233343543 ... LastLast

Similar Threads

  1. 3-Axis CNC Router - For Helices.
    By Dalmango in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 08-02-2014, 07:27 PM
  2. BUILD LOG: 3 Axis Router
    By GTJim in forum DIY Router Build Logs
    Replies: 1
    Last Post: 22-01-2013, 01:08 PM
  3. BUILD LOG: Wobbly: my first 3-axis router
    By Sodster68 in forum DIY Router Build Logs
    Replies: 8
    Last Post: 20-01-2013, 10:28 AM
  4. 3 axis cnc/router bed
    By dudz in forum Marketplace Discussion
    Replies: 23
    Last Post: 28-12-2012, 09:38 PM
  5. Need 6' x 4' bed, 4 axis router design.. Help..!
    By fasteddy in forum Gantry/Router Machines & Building
    Replies: 29
    Last Post: 17-09-2010, 12:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •