. .
Page 44 of 66 FirstFirst ... 34424344454654 ... LastLast
  1. #431
    Quote Originally Posted by JoeHarris View Post
    Panel progress... estop working nicely (Despite temporarily shorting out the 24v supply and wondering what the squealing noise was..!)
    Looks good, are you sure you've not done this before? Shorting out??? Do tell???
    .Me

  2. Quote Originally Posted by Lee Roberts View Post
    Looks good, are you sure you've not done this before? Shorting out??? Do tell???
    I connected the wires for the panel estop to the 24v fault indicator and the wires for the indicator to the estop meaning the 24 supply was just pumping current to itself. It took me a while to figure out what I had done wrong and it made a funny noise each time I switched it on to check if I had fixed it but it still seems to work! Whoops

  3. Quote Originally Posted by Lee Roberts View Post
    Looks good, are you sure you've not done this before? Shorting out??? Do tell???
    Oh and no, never before but I am enjoying it! Been watching other peoples builds on this forum for years though...

  4. #434
    Quote Originally Posted by JoeHarris View Post
    Oh and no, never before but I am enjoying it! Been watching other peoples builds on this forum for years though...
    Hehe I know that flavor!, good job it was only 24v then!
    .Me

  5. Video showing the installation of my panel controls:
    http://<a href="https://youtu.be/bgK...KEZsiwfB0 </a>
    Last edited by JoeHarris; 10-07-2017 at 11:35 PM.

  6. And one showing the installation of the cabinet fans... this job sucked!

    http://<a href="https://youtu.be/jJD...JDP88FGMns</a>

  7. #437
    Hi Joe
    Both links not working for me ?
    Mike

  8. Quote Originally Posted by mekanik View Post
    Hi Joe
    Both links not working for me ?
    Mike
    Oh. Try these...

    https://youtu.be/bgKEZsiwfB0
    https://youtu.be/jJDP88FGMns



  9. My drives have arrived and I have wired up the power supply to them (see photo) any reason why I shouldn't power them up with nothing else connected ??

  10. #440
    My drives have arrived and I have wired up the power supply to them (see photo) any reason why I shouldn't power them up with nothing else connected ??
    If it makes you happy Joe
    ..Clive
    The more you know, The better you know, How little you know

Page 44 of 66 FirstFirst ... 34424344454654 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: 3 Axis Router
    By GTJim in forum DIY Router Build Logs
    Replies: 8
    Last Post: 22-06-2020, 08:49 AM
  2. 3-Axis CNC Router - For Helices.
    By Dalmango in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 08-02-2014, 07:27 PM
  3. BUILD LOG: Wobbly: my first 3-axis router
    By Sodster68 in forum DIY Router Build Logs
    Replies: 8
    Last Post: 20-01-2013, 10:28 AM
  4. 3 axis cnc/router bed
    By dudz in forum Marketplace Discussion
    Replies: 23
    Last Post: 28-12-2012, 09:38 PM
  5. Need 6' x 4' bed, 4 axis router design.. Help..!
    By fasteddy in forum Gantry/Router Machines & Building
    Replies: 29
    Last Post: 17-09-2010, 12:56 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •