Thread: 3 Axis CNC router
-
24-06-2017 #421
-
As usual Joe you don't disappoint it a big credit to you
..Clive
The more you know, The better you know, How little you know
-
The Following User Says Thank You to Clive S For This Useful Post:
-
27-06-2017 #423
Mains power distribution in the control box is pretty much finished:
Last edited by Lee Roberts; 27-06-2017 at 07:27 PM. Reason: ADDED VID
-
-
The Following User Says Thank You to Clive S For This Useful Post:
-
27-06-2017 #425
Looking sweet Joe,
Just so you know the correct format for your videos to show "in post" is like this:
.Me
-
27-06-2017 #426
-
27-06-2017 #427
-
Ok Joe that's fine but I had to pick it up because it is dangerous to fuse the _ve Good man.
..Clive
The more you know, The better you know, How little you know
-
28-06-2017 #429
-
The Following User Says Thank You to Lee Roberts For This Useful Post:
-
29-06-2017 #430
Panel progress... estop working nicely (Despite temporarily shorting out the 24v supply and wondering what the squealing noise was..!)
Thread Information
Users Browsing this Thread
There are currently 5 users browsing this thread. (0 members and 5 guests)
Similar Threads
-
BUILD LOG: 3 Axis Router
By GTJim in forum DIY Router Build LogsReplies: 8Last Post: 22-06-2020, 08:49 AM -
3-Axis CNC Router - For Helices.
By Dalmango in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 08-02-2014, 07:27 PM -
BUILD LOG: Wobbly: my first 3-axis router
By Sodster68 in forum DIY Router Build LogsReplies: 8Last Post: 20-01-2013, 10:28 AM -
3 axis cnc/router bed
By dudz in forum Marketplace DiscussionReplies: 23Last Post: 28-12-2012, 09:38 PM -
Need 6' x 4' bed, 4 axis router design.. Help..!
By fasteddy in forum Gantry/Router Machines & BuildingReplies: 29Last Post: 17-09-2010, 12:56 PM
Bookmarks