3 Axis CNC router

[JoeHarris]

Hello. I have decided to catalogue some of the build logs i have found inspirational over the last couple of years in a place where I can find them easily !! Not an exhaustive list but if you are building then take a look at these... Please add to the list if there are others you have found useful. There is nothing like reading build logs to keep you going with (and changing!) your own build so Cheers to all of you for posting them!

Adcnc's build log

http://www.mycncuk.com/forums/gantry...tempt-cnc.html

Jazz turns the beast on its side!

http://www.mycncuk.com/forums/showpost.php?p=28039

Michael's build

http://www.mycncuk.com/forums/gantry...machine-4.html

Bruce's build

http://www.mycncuk.com/forums/showpost.php?p=37447

HiltonSteve first build log I read on mycnc I think

http://www.mycncuk.com/forums/showpost.php?p=17636

Jonathan's first build inc. rotating ballnuts

http://www.mycncuk.com/forums/showpost.php?p=19278

Matt (aka creaky)'s build

http://www.mycncuk.com/forums/showpost.php?p=42976

Matt's second super-fast build

http://www.mycncuk.com/forums/showpost.php?p=48953

Jonathan's "sufficiently strong machine !" (Needs no intro)

http://www.mycncuk.com/forums/showpost.php?p=49294

Adil - one to watch...

http://www.mycncuk.com/forums/showpost.php?p=42635

Silyavski - one to watch...

http://www.mycncuk.com/forums/showpost.php?p=54769

EddyCurrent - one to watch...

http://www.mycncuk.com/forums/gantry-router-build-logs/6565-ready-steady-eddy.html