Page 1 of 2 12 LastLast
  1. Hi just thought this would be an excellent topic and one that has my simple head spinning :lol: :lol: :lol:
    Ok I want to download some free software so I can practice using and also understand with ease the programming and running of a homebuild CNC machine which I will undertake very soon. Just was wondering what is the most easily to understand and more importantly get to working quite quickly without any steep learning curves. I have read on the other forums about Mach 3 as this seems like the holy grail in what everybody tends to use. I again would love the thought of using a UK based software which is easy to understand,use and programme. What would you guys recommend and also what did you find easy and which did you not :) The routout CNC software seems like it would be a good starting point. Maybe the board admins could contact Mike Gaylor and make him known that there are guys on this forum that would love to here from someone who could save us alot of work and errors JMHO ?? :D

  2. #2
    I'v been in contact with mike, ill give him an email after this and see if we can get him to come over.

    I thought i'd suggested it to him befor i ordered from him, but i'v had a look and it seems i havn't so ill let you know what he says.

  3. #3
    From a hobbyist point of view there a few out there.
    In no order there are Desk CNC, Turbo CNC, Mach 3 , CNC pro and EMC.
    This isn't a full list by any means but its a list of well supported programs.

    To go thru them quickly in the same order as they are stated.

    Desk CNC is reliant on a serial board from the same company and support for this isn't too good in the UK.

    Turbo CNC is well though off, it's still in DOS but the download isn't crippled in any way although they do ask you to register this.

    Mach 3 is probably one of the best out there, over 10,000 registered users and a fantastic support group both web based and on Yahoo. Very powerful and even beats some industrial controls. The demo is limited to 100 lines of G code

    CNC Pro is now in the public domain and is no longer supported but still has a good following. Not all G codes supported but most of the popular ones are.

    EMC runs under Linux and is free but unless you are very Linux savvy it can be a long learning curve.

    There are others but most seem to be very limited versions of art type programs.

    John S.
    John S -

  4. #4
    Hes now a member, not got an email back but he has posted on the other topic.

  5. #5
    Hi Kam
    I'd recomend Mach3 with Lazycam included in the deal from your friend. That way you can get on the phone and torture him :twisted: at every setup screen.

    Other solutions work but support in 'the same language' makes a big difference. I suppose that is what the UK forum is all about :roll:

  6. #6
    I'v just asked mike to take a look at this post, i have looked at Mach 3 & Lazy Cam, lazy cam also has some vid's on the site so you can watch them using it and i think this will help you alot as i found it very good.

  7. #7
    Hi All,

    As I'm sure your all aware we are distributers for the Mach 3 And Lazy Cam software here in the UK, If I can be of any assistance with Either Mach 3 or Lazy Cam then please do not hesitate to call me on Tel 01269 841230. (8-30AM - 7.00 PM) Please note it goes without saying that any product (software or hardware) bought from us has full UK email and telephone support from us.

    As I'm sure that you are aware the Mach 3 software is a very powerfull package, It is capable of driving Mills, lathe, Laser Cutter, Router, Plasma cutter.....the list goes on. I have personally converted / built all of these with Mach 3 as the controller Software. There is almost no limit to the machines that you can control, the only limit is your imagination.

    Please let me know what I can help anyof you with.

    Best Regards

    Mike Gaylor

  8. Thanks Mike that is some sound advice and I know youre backup service and customer care is 100% top notch. I will certainly be in contact with you when I'm ready to purchase the whole shebang CHEERS! :D

  9. #9
    Mach3 is awesome, (it is made easier by the fact I use fanuc based Gcode all the time at work.)
    It`s constantly being improved upon with an already staggering amount of features, I have a shuttlepro handheld pendant hooked up for selecting axes and manual jogging etc, even got a webcam setup with a viewing window in Mach3. The support available is phenominal, yeah I rate this software top class.

  10. #10
    Excellent, "shuttlepro handheld pendant" that sounds intresting ! how much are these ? Could i make one quite easy?

    A WEBCAM? hows that work whats it for?

Page 1 of 2 12 LastLast

Similar Threads

  1. software
    By rainboweyes in forum Computer Software
    Replies: 4
    Last Post: 09-02-2013, 10:59 AM
  2. Replies: 2
    Last Post: 11-12-2012, 11:58 AM
  3. Which Software
    By manofgresley in forum CAD & CAM Software
    Replies: 1
    Last Post: 26-12-2011, 03:08 PM
  4. New Software
    By luke11cnc in forum CAD & CAM Software
    Replies: 5
    Last Post: 14-09-2011, 05:00 PM
  5. What software can do this ?
    By Kammo1 in forum Computer Software
    Replies: 4
    Last Post: 05-04-2010, 06:57 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts