Page 3 of 3 FirstFirst 123
  1. #21
    Tom J's Avatar
    Lives in Melksham, United Kingdom. Last Activity: 2 Weeks Ago Has been a member for 3-4 years. Has a total post count of 148. Received thanks 7 times, giving thanks to others 18 times.
    Understand that is very old thread, but can somebody post final version with step by step instruction please?

    Ideally with travel to tool position and 2 stages (1st touch, retract and fine touch)
    I believe for many of you this is piece of pi...
    Thanks

  2. #22
    Quote Originally Posted by Tom J View Post
    Understand that is very old thread, but can somebody post final version with step by step instruction please?

    Ideally with travel to tool position and 2 stages (1st touch, retract and fine touch)
    I believe for many of you this is piece of pi...
    Thanks
    If your not into writing VB basic code or screen designing then Don't mess around Tom just buy Gerry's screen set it's worth every penny.

  3. #23
    Quote Originally Posted by JAZZCNC View Post
    If your not into writing VB basic code or screen designing then Don't mess around Tom just buy Gerry's screen set it's worth every penny.
    I'll second that, best $20 I've spent in a long time...
    Neil...

    Build log...here

  4. #24
    Unless you have a specialised screen set or don't like Gerrys screen set.
    John S -

  5. #25
    Quote Originally Posted by John S View Post
    Unless you have a specialised screen set or don't like Gerrys screen set.
    Trust you to throw spanner in the works.!! . . . . Better get coding then or ask friend nicely and he might give you some code.

  6. #26
    Tom J's Avatar
    Lives in Melksham, United Kingdom. Last Activity: 2 Weeks Ago Has been a member for 3-4 years. Has a total post count of 148. Received thanks 7 times, giving thanks to others 18 times.
    I do not mind buying that, considering that already managed stub the hole on my new sensor
    Where can I find description/link please?

  7. #27
    http://www.thecncwoodworker.com/2010.html is the link 😁

    Sent from my HUAWEI VNS-L31 using Tapatalk
    Neil...

    Build log...here

  8. The Following User Says Thank You to njhussey For This Useful Post:


Page 3 of 3 FirstFirst 123

Similar Threads

  1. Replies: 11
    Last Post: 01-01-2014, 09:01 PM
  2. What Spindle / Auto Tool Changer?
    By Chaz in forum Tool & Tooling Technology
    Replies: 11
    Last Post: 01-08-2013, 10:35 PM
  3. Boxford VMC190 Retrofit Problems, axis sounds very rough
    By mikegolding in forum Boxford Vertical Mills
    Replies: 5
    Last Post: 09-06-2013, 09:11 PM
  4. any one know about auto lube systems?
    By graffian in forum Milling Machines, Builds & Conversions
    Replies: 0
    Last Post: 02-03-2009, 05:52 AM
  5. Auto spindle lock
    By Robin Hewitt in forum Milling Machines, Builds & Conversions
    Replies: 5
    Last Post: 30-08-2008, 08:15 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •