Okay running into the cooling/SWARF problem and looking at options and they are as follows:

Designing a plate to go on the machine to allow SWARF being directly sucked up and hoping the air flow provides some indirect air cooling (not the best option but gets swarf out of the way).

Getting input on designing a compressor based (type to be determined within a budget) for putting a directed jet of air on the tool tip to remove swarf from the cutting area and directed cooling.

Using a combination of the two above to put air on the tip while sucking up the swarf with some form of area pick up.

My head is done in at the moment with client work and getting ready for a convention in the US, so any information or ideas would be greatly welcomed.

Michael