1. #1
    Another interesting read on the topic of profiled rails.

    Some really goods installation guidelines starting around page 75, detailing the use of reference edge too.


  2. #2
    Another one here:

    comparison chart between the main rails and carriages manufacturers:


    Great if you browse ebay :-) searching for that deal.

  3. The Following User Says Thank You to Boyan Silyavski For This Useful Post:

  4. #3
    Thanks guys, made this a sticky and gave it a new title.


  5. #4
    Last edited by EddyCurrent; 14-12-2013 at 06:13 PM.

  6. #5
    Info on Hiwin lubrication

    HIWIN Grease

    From section 7 of the Hiwin lubrication manual it looks to me like you need an EP1 type grease for standard applications and EP2 for heavy duty.

    Grease cross reference chart. http://papadopoulos-sa.com/pdfs_libr...ence_Sheet.pdf

    I like the look of the SKF LGEP2 or SKF LGMT2 here for example http://simplybearings.co.uk/shop/adv...grease&x=0&y=0

    Does anyone have a recommendation for grease make/type ?

    Edit: Cheaper alternative ? http://www.ebay.co.uk/itm/LITHIUM-EP...item1c26c58f14
    Last edited by EddyCurrent; 04-03-2014 at 10:32 PM.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted

  7. Eddy, not having any luck with either of these links?

    Sorry must be my browser being rubbish - working now. Thanks guys for putting these up.
    Last edited by JoeHarris; 19-02-2014 at 11:17 PM.

  8. The Following User Says Thank You to JoeHarris For This Useful Post:

Similar Threads

  1. Chip load chart
    By motoxy in forum Machine Discussion
    Replies: 1
    Last Post: 17-09-2012, 09:05 PM
  2. SBR v TBR - Comparison
    By Karl in forum Rails, Guideways & Bearings
    Replies: 0
    Last Post: 30-05-2012, 11:02 AM
  3. Breakout Board Comparison
    By 200thhorseman in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 26-03-2012, 11:28 PM
  4. hiwin profiled rail
    By jonm in forum Rails, Guideways & Bearings
    Replies: 7
    Last Post: 07-08-2010, 05:48 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts