. .
  1. #1
    Hi all,

    I recently returned from a trip to Canada where I made time to visit some DIY stores, similar to our B&Q for comparison of products. They have a store called Rona which is a Canadian company and Home Depot, a USA company now opening branches in Canada. I found the product offerings so different, I wanted to post so others can share my enthusiasm. Its a long post so please be patient.

    The first thing I noticed was 90% of their screws used a Robertson head. I thought Phillips was the most recognized screw.
    Click image for larger version. 

Name:	robertson screw.png 
Views:	462 
Size:	132.9 KB 
ID:	6791


    When visiting some friends, I saw this round socket all over the house near plug sockets. Well it turns out it was part of a central vacuum system. The Vacuum cleaner is located in the garage and you only have to attach hoses into these wall sockets and the vacuum cleaner switches on. Home depot sell a full kit excluding ducting. The third pic is a skirting mounted dust pan for sweeping rubbish and having it sucked up by the vacuum. Pretty neat stuff.
    Click image for larger version. 

Name:	vacuum wall plate.jpg 
Views:	323 
Size:	12.9 KB 
ID:	6794Click image for larger version. 

Name:	central vacuum.jpg 
Views:	396 
Size:	88.7 KB 
ID:	6795Click image for larger version. 

Name:	dust pan attachment.jpg 
Views:	337 
Size:	6.2 KB 
ID:	6774

    Laminated kitchen worktops are much better than ours. They have a profiled edges and built in back splash.
    Click image for larger version. 

Name:	laminated worktops1.jpg 
Views:	275 
Size:	25.4 KB 
ID:	6792Click image for larger version. 

Name:	laminated worktops.jpg 
Views:	352 
Size:	6.8 KB 
ID:	6793

    Everywhere you go they have lush green grass. Whether its for driveways, gardens or community spaces. Well that's because everyone installs sprinkler systems as standard. Some were always on display and some popup when needed. They are off the shelf items in both super stores.
    Attachment 6771

    When you talk about suspended ceilings, normally office environments come to mind. Not in Canada. They had a full aisle with all fixings and ceiling tiles for office and residential ceilings. I never seen anything like this in the UK stores, unless its roofing specialists, and still its only for offices.
    Click image for larger version. 

Name:	suspended ceiling.jpg 
Views:	428 
Size:	10.2 KB 
ID:	6772Click image for larger version. 

Name:	ceiling_tiles_4.jpg 
Views:	377 
Size:	16.5 KB 
ID:	6773

    I noticed their plastic coated steel bath tubs only because I couldn't see how they connected all the plumbing like drains and taps to it. Their tub and side panel are all one piece. Does look nice when fitted though and very strong
    Click image for larger version. 

Name:	bath tub.jpg 
Views:	400 
Size:	94.1 KB 
ID:	6775

    I've always been interested in their Heating systems. They don't use radiators, rather ducting systems where the heat is blown through vents in the floors or ceilings. The good thing with these systems is you can just as easily send air con, fresh air or ionized air through the same ducting. The downside is you see bulkheads all over the place where large rectangular ducking is hidden.
    Click image for larger version. 

Name:	ducting.jpg 
Views:	543 
Size:	8.0 KB 
ID:	6776Click image for larger version. 

Name:	hvac.jpg 
Views:	351 
Size:	14.3 KB 
ID:	6777

    Canada must have an insect epidemic as all the houses I visited had screens on the doors, windows and sliding patios doors. Three types are available to buy in the stores. A complete screened door which is fitted infront of your main front door. Annoying as you always have to open 2 doors to enter or leave. A rectractable screen fitted to one side. Not bad as when its not needed just leave it retracted. Sliding doors, are built with an extra glide where sliding screen resides, so can be left open when not needed. Suppose in some areas they can be referred to as storm screens for flying debris.


    Click image for larger version. 

Name:	scren doors.jpg 
Views:	369 
Size:	25.6 KB 
ID:	6780Click image for larger version. 

Name:	retractable screen.jpg 
Views:	293 
Size:	9.7 KB 
ID:	6781Click image for larger version. 

Name:	sliding_screen_door_repaired.jpg 
Views:	758 
Size:	17.2 KB 
ID:	6779Click image for larger version. 

Name:	sliding-door-3.jpg 
Views:	934 
Size:	60.9 KB 
ID:	6778


    They have a big market on rubber coated metal wire shelving. I gave a friend a hand installing some, and was a piece of piss. Basically all houses are dry lined so the fixings have a special pegs and nails to place any where on plasterboard. Yep nails, we had to hammer them in. Shelves were used in wardrobes, kitchens storage, walk in closets.
    Click image for larger version. 

Name:	wire shelf.jpg 
Views:	435 
Size:	8.0 KB 
ID:	6782Click image for larger version. 

Name:	wire shelf2.jpg 
Views:	304 
Size:	9.7 KB 
ID:	6783Click image for larger version. 

Name:	wire shelf1.jpg 
Views:	473 
Size:	13.3 KB 
ID:	6784Click image for larger version. 

Name:	wire shelf3.jpg 
Views:	354 
Size:	31.1 KB 
ID:	6785

    A few more interesting objects below.
    1. a ratcheting wrench with multiple socket heads all in one, no chance to loose sockets.
    2. a plastic lid that goes on top of paint tins for pouring paint or used to drip off paint brushes. It keeps the tin top clean which we all know gets messy.
    3. electric garage door openers. Kits ready to buy with motors, in-car controls, internal switches and external keypad switch. So no actual key needed.
    4. THey have a big market or fixed shower heads. I personally prefer hand held shower heads, it makes it easier to clean the shower.
    5. This funky device is a hinge pin door stop. I only know what it is because I saw it installed in someones house and asked.

    Click image for larger version. 

Name:	wrench.jpg 
Views:	299 
Size:	99.9 KB 
ID:	6786Click image for larger version. 

Name:	paint pal.jpg 
Views:	315 
Size:	8.0 KB 
ID:	6787Click image for larger version. 

Name:	garage door openers.jpg 
Views:	344 
Size:	17.7 KB 
ID:	6788Click image for larger version. 

Name:	fixed shower head.jpg 
Views:	319 
Size:	112.1 KB 
ID:	6789Click image for larger version. 

Name:	door stop.jpg 
Views:	334 
Size:	12.5 KB 
ID:	6790



    In know for sure when I'll be designing me dream house, I'm going Canada for inspiration.

    Thanks for reading
    Adil
    Last edited by Iwant1; 07-09-2012 at 03:57 PM.

  2. #2
    Quote Originally Posted by Iwant1 View Post
    The first thing I noticed was 90% of their screws used a Robertson head. I thought Phillips was the most recognized screw.
    Interesting stuff from that great freezer Adil... I'm fascinated about the differences across societies worldwide.

    I used plenty of square-drive screws... didn't know they were called Robertson head... when doing projects for my kids downunder last Xmas and what a pleasure they are to use... as they just don't slip... Mind you, it's important to set the clutch correctly or the screws easily pull right through!

  3. #3
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 3 Days Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,908. Received thanks 360 times, giving thanks to others 8 times.
    I like Canada. Still feeling gutted about not getting there this year, but looking forward to heading there next year for an extended period, if everything goes to plan.

    I've only ever been on the west coast, but all the places I've stayed in have had electric heaters, and I suspect the screens are more to do with keeping the native 4 legged wildlife out, rather than the winged pests!

  4. #4
    Here's another 'interesting' DIY finding from Canada:

    Last edited by Lee Roberts; 11-09-2012 at 11:16 AM.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  5. #5
    I'm glad to see he's using safe working practice and wearing hand protection!

    Russell.

  6. #6
    Quote Originally Posted by Jonathan View Post
    Here's another 'interesting' DIY finding from Canada:

    Now that's funny
    Last edited by Lee Roberts; 11-09-2012 at 11:19 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Interesting Mill Design on Hackaday
    By epninety in forum Milling Machines, Builds & Conversions
    Replies: 4
    Last Post: 01-03-2014, 05:10 PM
  2. NEW MEMBER: hello from canada
    By 59caddy in forum New Member Introductions
    Replies: 2
    Last Post: 06-08-2013, 01:11 PM
  3. Vac - clamp looks interesting and cheap what do you think?
    By Fivetide in forum Machine Discussion
    Replies: 3
    Last Post: 10-10-2012, 09:06 AM
  4. An interesting build, sort of CNC related...
    By irving2008 in forum General Discussion
    Replies: 3
    Last Post: 29-08-2010, 01:55 PM
  5. Interesting CNC image BLOG ..
    By emilvv in forum General Discussion
    Replies: 0
    Last Post: 20-07-2009, 08:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •