Page 1 of 2 12 LastLast
  1. #1
    Kai's Avatar
    Lives in Hull, United Kingdom. Last Activity: 28-04-2016 Has been a member for 6-7 years. Has a total post count of 72.
    I am looking for help advice in the above tital.
    I have access to solidworks 2012 and solidcam2012 I have an agrement with a freind to use his and do things for him.
    Thats great buT i have now managed to afford to get a machine of my own nothing to flash well more like a dim light really but it runs on mach3 although this is very popular software most of the main software people dont have much knowlage of it. Solidcam uk did not take me seriusly when I asked if there was a post available for it and even laughed at me over the phone.
    This did upset me and put me to thinking is there anyone out there that can help me set solidcam up to use mach3 correctly??
    Please if there is I'm sure we can worksomthing out that suits us both

    Rik

  2. #2
    Hi Rik

    I think I have a post processor for SolidCam/Mach I am away from my home pc at the moment so as soon as I can I will have a look and let you know.

    Andy

  3. #3
    Kai's Avatar
    Lives in Hull, United Kingdom. Last Activity: 28-04-2016 Has been a member for 6-7 years. Has a total post count of 72.
    thank fella that would be great if you have . All I need to do now is call the tech support desk and ask how to fix my friends templates and tool data bases that I tried to fix lol and I'm away

  4. #4
    Hi Rik

    PM me your e-mail address please

    Andy

  5. #5
    Quote Originally Posted by audioandy View Post
    Hi Rik

    PM me your e-mail address please

    Andy
    Hi Andy,
    I've exactely the same problem as Rik,
    I've tryed several Fanuc post, bute my machine makes strange circles ( bad lines in the Gcode) during work.
    I think the only good way to proceed is with a dedicate Mach3 post .
    Could you help ?

    Thanks a lot

    Renaud

  6. #6
    Hi Renaud

    Please send me your e mail in a pm.

    Andy

  7. #7
    Kai's Avatar
    Lives in Hull, United Kingdom. Last Activity: 28-04-2016 Has been a member for 6-7 years. Has a total post count of 72.
    How do you edit a post ? I know I'm gonna open myselfe to an assault on this bu tplease be nice and give me a clue people

  8. #8
    Quote Originally Posted by Kai View Post
    How do you edit a post ? I know I'm gonna open myselfe to an assault on this bu tplease be nice and give me a clue people
    As far as I know, this forum (like most others in fact) has a time limit on editing posts. I would guess that your posts from a week ago have gone past that time limit. It doesn't seem to say in the FAQ exactly how long you have.

  9. #9
    ...Or maybe not, I can edit posts going back at least two weeks, I didn't check any older.

    Below each post there should be a line with "Reply" , "Reply with Quote" and multiple-quote buttons on the right side. Your own posts should also have an "Edit Post" button here. I have no idea why it might not be there, unless there are some odd settings in place.

  10. #10
    Kai's Avatar
    Lives in Hull, United Kingdom. Last Activity: 28-04-2016 Has been a member for 6-7 years. Has a total post count of 72.
    Sorry I think we got crossed wires I was meaning how do you edit the post processor not my post on here sorry.
    I would like yo know where to find out how to do this or what to read to be able to understand this , does anyone know where to start?

Page 1 of 2 12 LastLast

Similar Threads

  1. SolidWorks and SolidCAM
    By bokicnc in forum Solidworks
    Replies: 0
    Last Post: 14-04-2014, 11:30 PM
  2. Hi, all what is best and why Bobcad cam 24 or SolidCam?
    By suesi34e in forum Programmers Corner
    Replies: 0
    Last Post: 19-09-2013, 09:19 PM
  3. Replies: 1
    Last Post: 20-10-2012, 02:50 PM
  4. Solidcam error
    By Kai in forum Solidworks
    Replies: 5
    Last Post: 10-05-2011, 03:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •