Thread: Help with settings!
Threaded View
-
29-09-2012 #4
Rule #1.. unless you need it, always go with the lowest usable option... 45kHz might well work, but it'll be more susceptible to noise, Windows glitches and other extraneous things... 25kHz will definitely be more robust. Missing 1 step pulse at 200steps/mm means losing .005mm - not that much but they all add up eventually... better to go with .00625mm resolution (in wood!?) and be safe...
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Saving machine settings between sessions
By Neale in forum Machine Control SoftwareReplies: 19Last Post: 07-05-2014, 08:17 PM -
Help withController dip switch settings and Mach3 motor tuning
By liamo1991 in forum Motor Drivers & ControllersReplies: 2Last Post: 15-11-2013, 02:22 AM -
Pulse rate or dip switch settings
By Jopo in forum Stepper & Servo MotorsReplies: 0Last Post: 29-04-2013, 08:08 AM -
Calculating torque settings for bolts.
By swarf-boy in forum Machine DiscussionReplies: 2Last Post: 22-12-2010, 12:18 AM
Bookmarks