1. #1
    I've written a little guide for anyone wanting to get into 3d milling using solidworks.


    I hope it helps some people and I would appreciate feedback and if this thread could be stickied.

    use my guide at your own risk! double check the tool paths in mach!!!!!

    https://docs.google.com/open?id=0B-O...0Y3ekZrRmtvVEU

    I advise downloading this and not viewing it in Google docs!!

    links to post processor

    https://docs.google.com/open?id=0B-O...EZpaHBmV0h4TEE
    Last edited by jcb121; 22-10-2012 at 10:16 PM.

  2. The Following User Says Thank You to jcb121 For This Useful Post:


  3. #2
    Wow, I just read your manual and without testing it, it will already solve some problems I have . Great job indead !!!
    Thanks a lot

Similar Threads

  1. SolidCam and mach3
    By Kai in forum Solidworks
    Replies: 12
    Last Post: 25-08-2017, 06:21 AM
  2. SolidWorks and SolidCAM
    By bokicnc in forum Solidworks
    Replies: 0
    Last Post: 14-04-2014, 11:30 PM
  3. Hi, all what is best and why Bobcad cam 24 or SolidCam?
    By suesi34e in forum Programmers Corner
    Replies: 0
    Last Post: 19-09-2013, 09:19 PM
  4. Solidcam error
    By Kai in forum Solidworks
    Replies: 5
    Last Post: 10-05-2011, 03:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •