. .

Thread: Mach3

  1. #1
    Does anyone know if there is a Function on mach3 that enables you to Preview the size the job you are working on will take up on the work piece.

    Does anyone know how I set mach3 to scan a part with a digital scanner.

    Many Thanks in Advance
    Pete

  2. #2
    I was meaning PROBE and not a scanner
    Petesos

  3. #3
    If you go on the 'Tool Path' tab (Alt-4) you can see extent of the tool-path under program limits.

    You should be able to just connect the probe to one of the inputs on your breakout board and Mach 3 will read it...
    Last edited by Jonathan; 23-10-2012 at 04:39 PM.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  4. #4
    Quote Originally Posted by Jonathan View Post
    If you go on the 'Tool Path' tab (Alt-4) you can see extent of the tool-path under program limits.

    You should be able to just connect the probe to one of the inputs on your breakout board and Mach 3 will read it...
    Hi Jonathan
    Here is a photo of it and I have looked all round it but there are no names or marks on it........any ideas ???Click image for larger version. 

Name:	2012-10-23 21.24.41.jpg 
Views:	404 
Size:	833.7 KB 
ID:	7201

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •