Hey guys, I need a little help....
Due to work commitments I'm struggling to Finnish off the upgraded machine.
Description of project:
As I'm not the best person with CAD I'm looking to hire/pay someone to help design and maybe cut an X & Z assembly. Z axis has never been my strongpoint (god knows why) and I've always settled for something that works. But I've spend a lot of time and money to just settle for something that could be better.
The main gantry is a Bosch rexroth extrusion at 160 x 80 1610mm long. On the top and bottom of that are 2 x TBR 20 rails and bearings.
The X axis is driven by a ballscrew hidden behind the gantry. (Distance for back plate and ballnut to match up can be measured for your drawings)
The Z axis can be fitted with hiwian rails or TBR I'm not fussed which.
This is a fairly urgent project.
Let me know if you need anymore details.
By D.C. in forum Gantry/Router Machines & BuildingReplies: 15Last Post: 25-06-2016, 09:13 PM
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 12Last Post: 21-10-2011, 03:50 PM
By swarfy in forum Metalwork Project ShowcaseReplies: 0Last Post: 18-12-2010, 05:17 PM
By antsals in forum Projects, Jobs & RequestsReplies: 9Last Post: 22-03-2010, 02:55 PM
By Mucky Mike in forum DIY Router Build LogsReplies: 3Last Post: 19-04-2009, 01:20 AM