. .
Page 1 of 3 123 LastLast

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    As you may have read in another thread, Irving has suffered a serious injury and it will be some time before he can get back to doing the things we take for granted.

    So without his permission or knowledge, (sought but not yet received) this thread has been created for those people who would like to offer him a helping hand. It may be helping get his workshop realised, it may be moving machinery to a more convenient place for him, it may be none of those things but it will be something that he needs some help in achieving.

    There is no timeline for this project and it may not start for some months. It is also likely there will be more than one opportunity available to assist.

    If you have some time you can spare, add your name below please. If as and when he is ready, we'll post the info here.

    EDIT: MODERATED THREAD

    Please keep this thread just for posting availability. Start another thread for any other topics.
    Last edited by mocha; 12-11-2012 at 09:23 PM. Reason: as above

  2. No problem :)

    I live near enough to make day trips feasible

    More than happy to help where ever I can :)

  3. The Following User Says Thank You to BillTodd For This Useful Post:


  4. #3
    Im up for that... Any thing i can do just let me know and im there...
    Last edited by mocha; 12-11-2012 at 09:20 PM.
    Always bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln

  5. The Following User Says Thank You to Ricardoco For This Useful Post:


  6. I am down on the Isle Of Wight, and I am more then happy to travel up, and help with what ever I can.
    "If first you don't succeed, redefine success"

  7. The Following User Says Thank You to Mad Professor For This Useful Post:


  8. #5
    I'm game for helping. Only 20 mins away so could help most evenings and all day Sundays. I think it will also be a good opportunity for us to meet fellow members.

    Adil

  9. The Following User Says Thank You to Iwant1 For This Useful Post:


  10. #6
    I'm along way away but I'm available when the time comes.!

  11. The Following User Says Thank You to JAZZCNC For This Useful Post:


  12. #7
    i was thinking more along the lines of irving with his bobble hat on playing forman while a slack hand full of us try not to spill to much concrete on his chrysanthemums ?

    EDIT: ill maybe pick jazz up on my way as long as he is in a good mood! :)
    Last edited by blackburn mark; 12-11-2012 at 09:45 PM.

  13. The Following User Says Thank You to blackburn mark For This Useful Post:


  14. #8
    Quote Originally Posted by blackburn mark View Post
    i was thinking more along the lines of irving with his bobble hat on playing forman while a slack hand full of us try not to spill to much concrete on his chrysanthemums ?

    EDIT: ill maybe pick jazz up on my way as long as he is in a good mood! :)
    I'll come over to yours Mark I'm only up the road and chip in for the petrol, I have camping gear so I can pitch up on the lawn if need be. I can do a bit of brick laying and I'm not to bad with a spade :)

    Fiction is far more plausible when wrapped around a thread of truth

    Nothing great was ever achieved without enthusiasm.
    Ralph Waldo Emerson


  15. The Following User Says Thank You to Fivetide For This Useful Post:


  16. #9
    Quote Originally Posted by Fivetide View Post
    I'll come over to yours Mark I'm only up the road and chip in for the petrol, I have camping gear so I can pitch up on the lawn if need be. I can do a bit of brick laying and I'm not to bad with a spade :)
    splendid, thats a possible three in my bus so far... my camper is a long way from being finished but there is no reason for anyone to be kipping on a cold damp lawn!

  17. #10
    Best to just pencil me in Max, not sure just how much use I will be but I am sure someone will be able to think of something.

  18. The Following User Says Thank You to martin54 For This Useful Post:


Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Vacancy: CNC machinist working Mazak machines Aberdeen
    By MazakE500 in forum Opportunities Available & Sought
    Replies: 0
    Last Post: 25-09-2012, 11:45 AM
  2. Waroc Minor photos for Irving2008
    By rogertyrrell in forum Gantry/Router Machines & Building
    Replies: 1
    Last Post: 02-09-2010, 12:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •