Ive looked at Building a power supply but "NO", I have no time, and No inclenation to build one so, Im looking to buy a power supply to run 4 x nema23 4nm motors on the front of 4 x MA860H drivers.

The Drivers spec:-
2MA860H Features:
- High performance, cost-effective
- Supply voltage up to DC(24-110V) AC(50-80V)
- Output current up to 7.2A
- Self-adjustment technology
- Pure-sinusoidal current control technology
- Pulse input frequency up to 200 KHz
- TTL compatible and optically isolated input
- Automatic idle-current reduction
- 15 selectable resolutions in decimal and binary, up to 12,800 steps/rev
- Suitable for 2-phase motors
- Support PUL/DIR and CW/CCW modes
- Short-voltage, over-voltage, over-current protections



Any sources or suggestions would be magic.

Rick