Greetings from the Oldham area

**Len-Tikular** · 17-11-2012

Anyone in the Oldham area operating home built CNC equipment I would be happy to hear from you.
I have a flat bed router 1.2 Mtrs by 600mm running under Mach3, using All Vectric software packages, Aspire, Vcarve Pro, Photocarve etc.

Currently I have completed my 4th Axis and have it attached to my router but want to use it with my bench mill so I need to build the handheld controller. Got all the bits but need a PCB. Can anyone help.?

Regards to all.

George

Click image for larger version.

Name: CNCRouter.jpg
Views: 250
Size: 54.2 KB
ID: 7403

**martin54** · 17-11-2012

welcome to the forum George, there seem to be people with machines all over the place so I would be surprised if there wasn't anyone in your area.

**blackburn mark** · 17-11-2012

Currently I have completed my 4th Axis and have it attached to my router but want to use it with my bench mill so I need to build the handheld controller. Got all the bits but need a PCB. Can anyone help.

http://www.mycncuk.com/forums/diy-pr...-indexing.html

this might do the trick if your a dab-hand with a soldering iron :)