1. #1

    thank you for entering in my post

    I'm looking for a job as CNC machinist,setter, programmer, operator

    I have more than 5 years of experince I've worked on Heidenhain system but I did programming also on Fanucsystem

    I'm am a fully skilled cnc miller Iknow very well Bridgeport machines however I worked on severalmachines too like CNC Lathe:Daenwoo, Mori seiki, comec. CNC Millings:Bridgeports,Sumo, Correa, Anayak, Daenwoo (3 and 4 axes)

    I'm desperate I am willing to relocate however I live in Stafford now West-midlands

    If you know some company near my area which has Bridgeport millings with heidenhain system or some other machines I listed above please let me know

    any information according this matter will be very appreciative

    thank you in advance for your help
    Last edited by mocha; 30-11-2012 at 05:38 PM. Reason: moved from Steppers forum

  2. Hi Hoezap

    We have a number of positions in West Midlands for Machinists so please contact Andy at Alecto Recruitment on 01329 836 580 or 07833 249 701.


    Andy @ Alecto Recruitment

  3. #3
    I will

    thank you !

  4. #4
    May be something going at Howardson Engineering near Derby, last time I went he was looking for somebody as they were stacked out with work. Nearly all HAAS machines both milling and turning, all newish kit.

    Give Them a call and ask for Pat - 01332 824777. He does quite a bit of our machining work.

    Tell him that Steve told you to call him, he will know who I am....!!

  5. #5
    Thank you Hilton Steve

  6. #6
    From Jobserve click this link to apply -> LINK

    CNC Miller

    Telford, Shropshire, 22,000 - 25,000 plus overtime

    CNC Miller
    Shropshire Region
    22,000 - 25,000 plus overtime
    With over 30 years precision engineering experience our Client is at the forefront of UK Manufacturing. Due to very increasing workload they are now actively looking to recruit the services of a CNC Miller with programming ability.

    Our Client provides a wide range of engineering services ranging from and including Machining, Welding. Fabrication and press work.
    This is a straight day's shift with an early finish on Fridays.
    To apply for this opportunity your must have or hold the following:
    Offline programming ability using Fanuc
    Knowledge of 3D systems CADCAM
    Edge line experience
    Self motivated and a can do attitude

    Applicants must be eligible to work in the specified location

    Telford, Shropshire, UK


    22,000 - 25,000 plus overtime

    SER Limited - Sean Larner


    JSTJC ID: 175415/5270319

    Posted Date
    09/12/2012 18:49:38

    CNC Miller job - Telford Shropshire - December-09-2012 (C3oFN)

    Fiction is far more plausible when wrapped around a thread of truth

    Nothing great was ever achieved without enthusiasm.
    Ralph Waldo Emerson

  7. #7
    sorry to slightly hi-jack this post.. but having no previous CNC experience do companies expect a certain type of training before they employ you and let you operate their machines? or could you go in and say yeah i built my own cnc machine been making my own stuff for 5 years gimmie a job?? just curious how it works

  8. #8
    sorry wify I don't understand what you say

    may you please better explain yourself ?

  9. Hi Wilfy

    From a recruitment point of view some clients would take you on as an Operator on around 7 - 8 per hour then train you to be able to set the machine which means your hourly rate would go to around 9 - 10.

    You will need to work your way up from the bottom unfortunately but there are a few courses out there to train you how to programme which will also help your earning potential.

    Hope that helps!


    Andy @ Alecto Recruitment
    Currently we have over 100+ UK wide vacancies

    CNC Machinists, CNC Programmers, Borers, Turners, Millers, Grinders, Machine Tool Fitters, Machine Tool Electricians, Machine Tool Maintenance, Manual Machinists, Maintenance Engineers, , Fitters, Fabricators, Sheet Metal Workers, CNC Press Brake, CNC Punch, CNC Laser, Design Engineers, Material Planners, Directors, Production Supervisors, Production Managers, Machine Shop Managers, Team Leaders and plenty of other bespoke positions.

  10. #10
    Thank you Andy


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts