I recently posted a VFD noise interference problem question. after looking at the answers I have decided that I shall renew the connection cable between the VFD and the spindle..its a 1.5kw water cooled as a belt and brace operation. Just asking I have managed to source the correct connection plug from the US but have two questions to ask further about the actual cable.

1/ Is this cable in the link below suitable as shielded cable..I worked out the cable dia is 1.6mm so capable of approx 10 amps and 2000 watts.

2. the cable shown has a ground wire as well as an earth ...Am I right that this ground wire is connected to earth at the VFD end only and not at the spindle end ?

BELDEN 19364 SHIELDED MAINS POWER CABLE PER METRE | eBay

Many many Thanks