Thread: RQF: Router Gantry plates
Looking to have these made... I wanted to make them myself but because of my job and it being far to friggin' cold up here in my tin can shed. I'd like to have these and a few other bits made up so that I can have mark 2 of my router up and running for when its a bit warmer.
IGES file attached... nothing too difficult. To be milled out of 6080 alu, 8mm thick. A bit of profiling and pocketing and a spot of drilling. Some edges to be chamfered. Would need two of these, but only one has the pocket and holes in the centre. Overall 114 x 200 x 8mm.
Needless to say the more accurate the better... so it would be nice to have them made on a reasonably sized machine rather than a router made of cheese :P
Could you please tell me the quantity you want? Thanks
By jrcast in forum Gantry/Router Machines & BuildingReplies: 16Last Post: 13-06-2014, 05:24 PM
By Richard in forum Machine DiscussionReplies: 2Last Post: 18-02-2014, 03:18 PM
By EddyCurrent in forum Gantry/Router Machines & BuildingReplies: 34Last Post: 09-09-2013, 03:47 PM
BUILD LOG: Fixed Gantry RouterBy lateAtNight in forum DIY Router Build LogsReplies: 24Last Post: 28-05-2009, 10:30 PM
By Smiler in forum Milling Machines, Builds & ConversionsReplies: 0Last Post: 19-11-2008, 08:25 PM