Page 5 of 5 FirstFirst ... 345
  1. #41
    Quote Originally Posted by blackburn mark View Post
    iv seen you pull this card on a few occasions jazz and it puzzles me... you pull it out whenever you have carved massive chasm of discord between yourself and your adversary ?
    Erm first If you read again my first post then I didn't carve anything just a bit of advise given in good faith.! It's not my fault if the OP took it has attitude it was certainly not meant that way.

    Quote Originally Posted by blackburn mark View Post
    what puzzles me is why do you bother to describe how much your adversary is missing out in not having you as a buddy ?
    it seems a little pointless... is it a Yorkshire thing ?
    Second I don't see anyone has adversary and the point of my comment was to show that if the OP treat people with a bit more courtesy he could be surprised by the help he'd get back in return and in this case specificly from some one with experience of the exact sort thing he wants done and the tools to get it done.

    Employing Courtesy goes along way and cost's nothing.!! Dishing out insults takes the same effort and cost's plenty. . . In this case the probably 45hr labour for an engineer.??

  2. #42
    Hi guys,

    I think enough has been said here now; there is all sorts being said and flying about.

    I dont see the thread will need to be continued in favour of the original request and that being a RFQ, if anyone would like to contact Ratch regarding this RFQ, please do so via the PM system.

    Quote Originally Posted by JAZZCNC View Post
    Employing Courtesy goes along way and cost's nothing.!! Dishing out insults takes the same effort and cost's plenty.
    Definitely agreed, sorry guys but in courtesy to everyone this is now locked. :(

    Community & Forum Rules - PLEASE READ !

    .Me
    .Me

Page 5 of 5 FirstFirst ... 345

Similar Threads

  1. RFQ: Need part
    By Buckis in forum Projects, Jobs & Requests
    Replies: 0
    Last Post: 21-02-2014, 01:21 AM
  2. Home is where the part is?
    By HankMcSpank in forum Machine Discussion
    Replies: 4
    Last Post: 15-07-2013, 09:58 AM
  3. Woo, my first 'proper' part!
    By craigrobbo in forum Woodworking Project Showcase
    Replies: 29
    Last Post: 05-08-2012, 02:51 PM
  4. What I did this weekend.. part 2
    By irving2008 in forum Metalwork Discussion
    Replies: 50
    Last Post: 08-04-2012, 02:57 PM
  5. What I did this weekend.. part 1
    By irving2008 in forum Metalwork Discussion
    Replies: 2
    Last Post: 12-09-2010, 09:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •