. .
  1. #1
    Can anyone suggest a suitable F&S for a 20deg V-bit with a 0.2mm tip?

    http://cgi.ebay.co.uk/ws/eBayISAPI.d...E:L:OC:GB:3160

    I will be cutting Walnut to make a photo using VCarve. Maximum depth is 2.5mm.

    Thanks very much!

  2. #2
    I just had a quick play and found it doesn't make a huge difference as long as it doesn't burn the wood nor break the bit.

    I'm going to try 1,000mm/min and 22,000RPM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Advice needed on Amadeal
    By croy in forum General Discussion
    Replies: 13
    Last Post: 21-08-2015, 01:28 PM
  2. bit of advice needed for first mill
    By jmac80 in forum Milling Machines, Builds & Conversions
    Replies: 9
    Last Post: 06-04-2014, 10:59 PM
  3. First steps, advice needed
    By Wobblycogs in forum Gantry/Router Machines & Building
    Replies: 6
    Last Post: 02-11-2012, 02:30 PM
  4. Advice needed for Z Design
    By Hobgoblin in forum Linear & Rotary Motion
    Replies: 8
    Last Post: 10-09-2012, 09:18 PM
  5. SPG X3 CNC Mill, advice needed please
    By shaggyhawkings in forum Milling Machines, Builds & Conversions
    Replies: 4
    Last Post: 07-01-2010, 11:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •