Threaded View
-
02-01-2013 #1
Last Activity: 2 Days Ago
Ok.... I bought a set of 25mm supported rails and bearings from Chai on Ebay to replace my 25mm unsupported rails (fantastic service and Fast shipping). Problem I have is : I mounted the rails on my aluminium profile either side of the 16mm ballscrew (make unknown but looks like Hiwin in google pictures). The top of the "T" plate (I call it) that is fastened to the ballnut ends up 3mm higher than the top of the rail bearing blocks. Is this a common problem ? or can I buy a lower T plate for the ballscrew ?. I would mill it down, but obviously I cannot, and I do not have a big enough belt sander. I really would hate to put packers under the rails.
and before you ask....yes all the balls fell out. ah well I'm confident I will get them in (without looking first)
Last edited by dudz; 02-01-2013 at 09:42 PM.
3 axis CNC/router / Alu profile frame....25mm Alu Cutting bed X=500mm Y=300mm Z=110mm.....Supported 25mm X rails ....Supported 20mm Y rails....Supported 20mm Z rails.....2.2kw Chinese WC spindle..... CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller....M542 Drivers..SY60STH86-3008BF Motors...running....Mach3 / Cambam / Emachineshop.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: linear rails and hi lead ballscrew
By John S in forum Items For SaleReplies: 2Last Post: 05-12-2012, 08:21 PM -
FOR SALE: Stepper Driver. 4x Steppers. Supported Rails.
By Conan257 in forum Items For SaleReplies: 3Last Post: 24-10-2009, 07:31 PM
Bookmarks