16-01-2013 #51This range of machines are supplied to the world's leading probing manufacturers, in tests we achieve an accuracy of less than 0.010mm/300mm of the whole machine.
Last edited by gavztheouch; 03-03-2014 at 01:47 PM.
This is a quick mock up to mount my thrust bearings. This will fix in place the normally floating end, this means the spring in the motor will soak up the expansion of the screw and the motor side will effectively become the floating end, if it need more I can use a oldham coupler.
Il need another 4 holes that will be tapped to fix the bearing to the mount which will be made of aluminium.
Last edited by gavztheouch; 16-01-2013 at 01:50 PM.
I bought a copy cat of one your machines that was actually better in some cases than yours but still inadequate. In this case at least it correctly captured the ballnut but still had similar issues with the ballscrew mounting that you have engineered into your designs.
Its sloppy, cheap and has serious question marks for the long term accuracy of the machine. You're basically knocking these out as simply as humanly possible to maximise profit. It wouldn't be so bad if you were charging a suitable amount but 4 series extrusions with the most basic and barebones mechanical make up possible? Not acceptable in my opinion.
You talk about selling to businesses? Your going to cost them money in the long run because they'll have to fix or replace what you should have done right to start with.
Please go back, redesign and come with something fit for purpose and stop inflating the capabilities of your machines. They're very very lightweight machines capable of only light cuts in soft materials. And your accuracy figures mean little. Is that the accuracy of a part, if so what material? Or is it more likely the accuracy of the machine with no load ie. cutting air?
Just reading through older stuff and saw this, I always thought their stuff looked particularly shonky for the price on eBay but it looks like they manage under-engineering on a scale that would put professional bodgers everywhere to shame!
Boring and threading the "Liquorice Extrusions" was the high point of the BS excuse for me!
Anyone seen any of their more recent contraptions?If you will not be swayed by logic or experience simply pick the idea you
like best, but ask yourself why you sought advice in the first place and,
for a simple life, perhaps consider not doing so in future
I had the problem of the floating acme screw and I put in a small thrust bearing from ARC Euro held against the motor mount extrusion by a collar with a grub screw to remove the end float on the screw. I did similar on the X axis, but the Z axis was a slightly different bodge as I needed to prevent it pushing upwards, so I put in a couple of thrust bearings to space it out (1 bearing and washers would have done !) and used the coupler to act as the retaining collar.
The machine is now (just) adequate for hobby use.
But I have to give a big thank you to Marchant Dice for opening my eyes to CNC. I now have the great desire to make a decent machine.
This quote from MD amused me 'in tests we achieve an accuracy of less than 0.010mm/300mm of the whole machine' I would have expected better than rather than less than, but Hey Ho maybe ?
BTW Nick, I have not seen any of their recent excrences - I believe their machines should be labelled 'For amusement only', they certainly make me smile
AND I like your use of the word 'contraption' - very apposite.
Last edited by cropwell; 03-09-2016 at 07:15 PM.It takes all sorts to make a world, I am just glad I am not one of them.
By agent17 in forum Marketplace DiscussionReplies: 18Last Post: 21-06-2015, 09:55 PM
By gavztheouch in forum Items For SaleReplies: 1Last Post: 13-02-2014, 07:29 PM
BUILD LOG: A3 Marchant Dice KitBy neo in forum DIY Router Build LogsReplies: 24Last Post: 23-03-2011, 05:55 PM
By irving2008 in forum Marketplace DiscussionReplies: 4Last Post: 06-09-2008, 04:37 PM