Thread: Cutting Fluid

  1. #1
    For a while I have been using Rocol RTD spray and found it to be very good by also very smokey by the time I had done a fair bit of cutting. I even got to the stage of installing an extractor fan in the workshop to suck out the fumes from it.
    But someone gave me a tub of Rocol Ultracut Evo 250 to try. Its superb!! Used it today for the first time. 1 in 20 mix with clean water and used a small spray bottle to apply it.
    Very little fumes from it and its not as clingy as the oil based stuff so the chips clear better as well. I like it alot.

  2. #2
    m_c's Avatar
    Lives in East Lothian, United Kingdom. Last Activity: 19 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,244. Received thanks 247 times, giving thanks to others 6 times.
    Water soluble is better for the majority of cutting, and is what I use for most machining.
    However, pure oil is better for operations with high loads, such as tapping, and where you really don't want things to stick/gall, such as parting of in a lathe.

  3. #3
    I wish I had tried it earlier. It is far better.

  4. #4
    I love the smell of Rocol in the morning, kinda smells like progress.

  5. #5
    I didnt mind the smell too much. It was the smokescreen that wasnt too impressive

Similar Threads

  1. Aluminium cutting
    By Bush Flyer in forum Metalwork Discussion
    Replies: 55
    Last Post: 13-05-2016, 09:57 AM
  2. Cutting Ply/MDF
    By Leadhead in forum Wood Finishing Tips & Tricks
    Replies: 3
    Last Post: 02-10-2013, 01:59 PM
  3. The cutting fun begins
    By m.marino in forum Machine Discussion
    Replies: 2
    Last Post: 01-04-2012, 12:35 AM
  4. PCB Engraving / Cutting
    By jrob3rts in forum General Discussion
    Replies: 6
    Last Post: 02-06-2011, 09:35 PM
  5. FOR SALE: High speed fluid coupling
    By Jimmybristol in forum Items For Sale
    Replies: 1
    Last Post: 30-05-2011, 11:05 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts