. .
  1. #1
    Hi,

    Does anyone have a Boxford 125Tcl chuck for sale or could tell me where or what fits.?

    Cheers

  2. #2
    Think Robbin's got one of these...
    .Me

  3. #3
    It looks like that lathe takes an 80mm chuck, in which case a generic chuck should fit as they are standardised. You should be able to just measure the spindle register diameter, and hole positions then check them:

    Lathe Chucks - Arc Euro Trade

    They're cheaper on eBay, but the drawings there are good.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  4. #4
    Can you get a cheaper degree off Ebay, I'll have to have a look.
    John S -

  5. #5
    Original Pratt and Burnerd are 82mm diameter, just measured.

  6. #6
    Quote Originally Posted by Jonny View Post
    Original Pratt and Burnerd are 82mm diameter, just measured.
    Cheers. Any chance you could take me a picture of how it fastens to spindle.?

  7. #7
    Its under a bench, cant lift guard up.
    Three cap hd screws fix to spindle close to the bore of chuck so might be very limited on what chucks will fit ie clear the scroll.

  8. #8
    Ok cheers anyway. . . . . Ye that's what I suspected has the spindle nose has threaded holes in end but thought they must be close to Bore.
    I'll see what's available and then if not then I'll try to find one with correct register and maybe drill.?

  9. #9
    Bit of rust on mine, might not show up very well.
    If i get chance i will see if i can get a piccy.

    Bought it three years ago and never done a thing with it.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. REBUILD: Boxford 125TCL
    By Roadrunna in forum Lathe Rebuild Logs
    Replies: 4
    Last Post: 23-08-2014, 05:15 PM
  2. WANTED: Wanted, PCB's from a Boxford 125TCL
    By dragon in forum Items Wanted
    Replies: 1
    Last Post: 12-06-2013, 02:32 PM
  3. Anyone stripping out a Boxford 125TCL
    By dragon in forum Boxford Lathes
    Replies: 0
    Last Post: 14-03-2013, 10:10 PM
  4. WANTED: Denford EasyTurn Wanted - Boxford 125TCL & AUD Part ex.
    By rnr107 in forum Items Wanted
    Replies: 6
    Last Post: 24-08-2012, 11:27 AM
  5. WANTED: Boxford 125TCL Tool holder?
    By Minnican in forum Items Wanted
    Replies: 2
    Last Post: 16-02-2011, 09:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •