Page 2 of 2 FirstFirst 12
  1. #11
    oscar's Avatar
    Lives in Oxford, United Kingdom. Last Activity: 3 Hours Ago Has been a member for 5-6 years. Has a total post count of 57. Received thanks 2 times, giving thanks to others 1 times.
    Wait for your missus to go out and stick it in the oven on highest temp! :)) then wack it in the dishwasher.
    Last edited by oscar; 31-01-2013 at 08:56 PM.

  2. #12
    Quote Originally Posted by D.C. View Post
    Have you tried electrolysis? It works great for rust removal but I have never personally tried it on old paint. The internet seems to think it will work though.

    Electrolysis Cleaning Method


    Paint Stripping with Electrolysis p1o2 - YouTube
    I've accidently done that before now - it can be quite effective. Also good for blowing a hole in your kitchen ceiling
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  3. #13
    Hi Craig , I'm in Wigan, and I have a modelling shot blaster, if you can get down I'll be glad to blat the frame for you.

  4. #14
    Still think best bet is drop it in to a shotblasters they will do while you wait a couple of mins for about a fiver.
    Certainly my bead blaster running 10bar sand and glass mix would be tough going about an hour.

  5. #15
    D.C.'s Avatar
    Lives in Birmingham, United Kingdom. Last Activity: 05-01-2016 Has been a member for 4-5 years. Has a total post count of 326. Received thanks 30 times, giving thanks to others 24 times.
    Quote Originally Posted by Jonathan View Post
    I've accidently done that before now - it can be quite effective. Also good for blowing a hole in your kitchen ceiling
    Were you trying to strip the paint off your homemade railgun again? I thought we warned you about that...

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Long shot question.. about shared workshops
    By Fivetide in forum Woodwork Discussion
    Replies: 5
    Last Post: 02-02-2014, 09:25 PM
  2. Can you identify this paint on metal finish..?
    By Wal in forum Metalwork Discussion
    Replies: 2
    Last Post: 29-01-2013, 06:25 PM
  3. AM882,s and Mach3 ......plus hair removal !!!
    By Buba b in forum Motor Drivers & Controllers
    Replies: 3
    Last Post: 26-10-2012, 05:11 PM
  4. Powder coat & paint
    By craigrobbo in forum Metal Finishing Techniques
    Replies: 6
    Last Post: 06-08-2012, 09:06 PM
  5. Air cooling/SWARF removal
    By m.marino in forum General Discussion
    Replies: 14
    Last Post: 01-07-2012, 12:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •