. .

Thread: Dc servo driver

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 30-01-2013 #1
    Treemonkey's Avatar
    Lives in Rotherham, United Kingdom.
    Treemonkey
    Last Activity: 09-04-2014 Has been a member for 8-9 years. Has a total post count of 28.
    Hi all,

    I bought 3 dc servo drivers off eBay and cannot really find any information on the case to get any further detailed information :(

    I have the matching motors for the drives which are wired into blocks which slot in so they are no problem.

    This leaves 7 terminal screw blocks.. I've done a test using an old atx psu powering it up using 12v and the motors ran. The supply was connected to terminals 5 and 7 so I assume that 6 is for a ground. Terminals 1,2 and 3,4 are respectively shorted with bits of wire.

    so can anyone help me figure out what 1,2 and 3,4 are and how I may control it?

    I can add a picture tomorrow if that will help.

    many thanks,
    Sam
    Last edited by Treemonkey; 30-01-2013 at 10:16 PM. Reason: Crap title!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. AC servo motor help !
    By rnr107 in forum Stepper & Servo Motors
    Replies: 35
    Last Post: 10-08-2015, 02:37 PM
  2. Closed loop Step Servo Drive Driver 2HSS86H + 4.5N.M Motor + Encoder
    By george uk in forum Motor Drivers & Controllers
    Replies: 20
    Last Post: 23-06-2014, 08:38 PM
  3. Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
    By craynerd in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 16-03-2014, 07:29 PM
  4. 400W servo - Leadshine ACS806 + ACM604V60 driver - PSU size?
    By dsc in forum Stepper & Servo Motors
    Replies: 10
    Last Post: 23-04-2013, 05:33 PM
  5. re servo encoder
    By Scott in forum General Electronics
    Replies: 6
    Last Post: 24-06-2010, 08:30 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules