Threaded View
-
03-02-2013 #12
Last Activity: 25-02-2022
If the breakout board is the same as the ZP5Aint that we sell, then you have it connected to the drivers wrong.
There is no VCC on the breakout board and the step, direction and enable are buffered. (So they give a 5V pulse)
So lets take the X axis as an example.
Xn is GND so goes to all the negative sides of the the control inputs (PUL-, DIR- and ENA-).
The XD goes to Dir+, XS goes to PUL+ and XE goes to ENA+.
Also dont use USB to power the 5V, use an external power supply and put the selector switch to DC 5VLast edited by Gary; 03-02-2013 at 09:56 PM.
Visit Us: www.automationshop.co.uk
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Mach Turn
By Kai in forum CAD & CAM SoftwareReplies: 5Last Post: 02-08-2016, 02:40 PM -
eBay: Dell Optiplex 755 & Bobcad V21 CAD/CAM & Training Videos $1 No Reserve 24 Hours
By Storm2313 in forum Items On eBay UKReplies: 0Last Post: 30-03-2013, 01:57 AM -
BUILD LOG: Quirky Turn Mill Build
By vtcnc in forum DIY Router Build LogsReplies: 8Last Post: 16-09-2012, 02:53 AM -
66 Piece TCT Router Cutter Set for £120 on Rutlands website for 48 hours
By WandrinAndy in forum Marketplace DiscussionReplies: 4Last Post: 30-08-2012, 11:41 PM -
LED not turn on
By Awel in forum Motor Drivers & ControllersReplies: 1Last Post: 06-12-2011, 06:59 AM
Bookmarks