1. #1

    Click image for larger version. 

Name:	vacsmall3.JPG 
Views:	369 
Size:	312.8 KB 
ID:	8163Click image for larger version. 

Name:	vac2.JPG 
Views:	2377 
Size:	267.1 KB 
ID:	8164Click image for larger version. 

Name:	vac1small.JPG 
Views:	2295 
Size:	428.7 KB 
ID:	8165

    EBAY ( its goes live at 22:00 6th feb )

    Less than 12 months old, degassing chamber. New cost £280



    Robinair RA15601 6CFM was £320 new.


    *********** Collection is encouraged as these Items are heavy and you will save on the transport/shipping costs. ******************



    This has been the best combination I have had so far as degassing chamber and pump, the chamber seals tight instantly the vacuum starts and the Robinair takes the vacuum to 30 hg and below in 5 – 6 seconds, then holds the vacuum fast. I’m only selling it because I need a larger chamber. All the coupling’s pipes gauges come with it. All you need to do is connect the pipe and plug it in and instant vacuum ( you also need electricity to power the pump lol ) Chamber has a clear acrylic top so you can see you resin – rtv etc bubbling and the valve handles means you can let in air if the degassing is to vigorous instantly ( stop it spilling over), takes a couple of tries to know how much you materials need but you soon get the hang of it. Vacuum releases in less than a second so no time wasting with quick cure resins.


    “This is about the degassing chamber from the guy I bought it from –



    Degassing / Vacuum Chamber 10 ltr
    The chamber is 225mm in diameter, 260mm deep and has a 20mm clear acrylic top. It is constructed with a 6mm steel base (with a layer of rubber on the base) and a 12mm thick nylon tube, with a rubber gasket on the top, to insure a good seal against the acrylic top. The benefit of using the nylon is its translucency. It let’s in more light than other chambers on the market, thereby allowing the user to see inside with ease. It also comes with a length of hose, a dial gauge, a right angle hose fitting and a small tube of silicone grease (to aid the seal between the acrylic top and the rubber)
    Please note: There are some scratches on the surface of the nylon tube, this is from the manufacture of the tube and are purely cosmetic and won't affect the performance of the Vacuum chamber."



    Robinair RA15601



    High quality 6CFM vacuum pump

    • Two stage design – second stage starts pumping at a lower pressure to pull a deeper ultimate vacuum
    • Offset rotary vanes – proven design creates the deep vacuum conditions needed for a thorough evacuation
    • Gas ballast feature – helps keep the pump oil clean by reducing condensation of moisture
    • Iso-Valve – isolates pump from the system with just a 1/4 turn, making it simple to measure rate of rise
    Last edited by Jonathan; 07-02-2013 at 07:23 PM.

    Fiction is far more plausible when wrapped around a thread of truth

    Nothing great was ever achieved without enthusiasm.
    Ralph Waldo Emerson

  2. #2
    Sold to a good home many thanks Matrin.. how do you mark it as sold now ?

    Fiction is far more plausible when wrapped around a thread of truth

    Nothing great was ever achieved without enthusiasm.
    Ralph Waldo Emerson

  3. #3
    You should be able to just edit the first post, go to advanced then change the tag from 'for sale' to 'sold'. I'll do it if for some reason you can't...
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  4. #4
    Maybe I'm doing it wrong Jonathan but I cant see the button even in advanced mode for some reason ? So if you could change it .. I would be most greatful

    Fiction is far more plausible when wrapped around a thread of truth

    Nothing great was ever achieved without enthusiasm.
    Ralph Waldo Emerson

  5. #5
    Done it. Maybe only moderators can change that, which would explain why not many have been changed...
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

  6. #6
    Thanks Jonathan it must be only ops as you said

    Fiction is far more plausible when wrapped around a thread of truth

    Nothing great was ever achieved without enthusiasm.
    Ralph Waldo Emerson

  7. #7
    Lee has now fixed this so everyone can and should change their thread prefixes from 'For Sale' to 'Sold' when appropriate.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

Similar Threads

  1. FOR SALE: Delta pump
    By onecut in forum Items For Sale
    Replies: 0
    Last Post: 15-05-2014, 02:59 PM
  2. Vacuum pump for a large matrix bed cnc 5 by 10 foot
    By gavztheouch in forum General Electronics
    Replies: 4
    Last Post: 03-11-2013, 06:01 PM
  3. Spindle Water Pump
    By Tomnewry in forum Spindles & Drive Motors
    Replies: 0
    Last Post: 11-08-2013, 01:05 PM
  4. SAE thread fittings Vacuum Pump
    By Bazzer in forum Marketplace Discussion
    Replies: 2
    Last Post: 27-05-2013, 12:02 AM
  5. Machine oil pump
    By cncezee in forum Milling Machines, Builds & Conversions
    Replies: 3
    Last Post: 24-11-2010, 05:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •