Threaded View
-
17-02-2013 #1
Hi guys
I recently bought a cnc3040z off ebay and before i even run the thing im sorting out the poor cable quality and grounding issues etc mentioned by other owners.
While ive got the thing stripped I thought it would be worth adding probe and limit switch outputs to the control box but wanted to know if anybody could confirm that the pinouts for probe and limit switches are is as it says on the board?
Has anybody added these to one of these boards and did you have any problems?
thanks :)
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
EMC2 home/limit switches... only acting as limit?
By vputz in forum LinuxCNC (EMC)Replies: 4Last Post: 15-10-2014, 09:51 AM -
dowel pins & corresponding drill sizes to get a tight fit....
By HankMcSpank in forum Tool & Tooling TechnologyReplies: 7Last Post: 04-07-2013, 08:50 PM -
RFQ: 16mm long stainless pins with m5 tap
By dazza in forum Projects, Jobs & RequestsReplies: 12Last Post: 11-03-2013, 03:12 PM -
ports and pins for system4
By Dan Brown in forum Motor Drivers & ControllersReplies: 2Last Post: 18-01-2010, 06:37 PM -
Ports and pins help ? mach 3
By xchipx in forum Artsoft Mach (3 & 4)Replies: 0Last Post: 19-04-2009, 12:45 PM
Bookmarks