Cut depths and spindal speeds to improve finsh time

[GEOFFREY]

Hi, No expert, but I cut 15mm ply and 15mm mdf at 6m/min and 18k rpm using either straight or spiral 2 flute cutters and break very few. I am of course aware that I will probably be told that I'm doing it all wrong!!! G.

[JAZZCNC]

Hi, No expert, but I cut 15mm ply and 15mm mdf at 6m/min and 18k rpm using either straight or spiral 2 flute cutters and break very few. I am of course aware that I will probably be told that I'm doing it all wrong!!! G.

Not by me Geoffrey your cutting spot on IMO.

[deebo]

But what size cutter are you using?

[GEOFFREY]

But what size cutter are you using?

6mm cutters and forgot to add that I cut in a single pass.