Hello,

I have started one year ago cnc project and would like to share it here :) Motors are Nema34 from China, Drivers also from the same place. Linear rails are V groove bearings, got the rails a little used but in good working condition. Also created 3:1 belt reduction with HTD 3M timing belts. Drive system is rack and pinion, module 1.5, accuracy i have at this moment is about 0.2mm.
The first job with my cnc was dust Cyclone, works perfect.

Attaching some pictures from Inventor:

Click image for larger version.  Name: front.jpg  Views: 568  Size: 201.1 KB  ID: 8244Click image for larger version.  Name: persp long.jpg  Views: 532  Size: 255.5 KB  ID: 8245Click image for larger version.  Name: persp top.jpg  Views: 632  Size: 435.9 KB  ID: 8246Click image for larger version.  Name: persp.jpg  Views: 723  Size: 371.5 KB  ID: 8247

And here is result after 10 month :)

Click image for larger version.  Name: DSC_0007.jpg  Views: 530  Size: 231.9 KB  ID: 8248Click image for larger version.  Name: DSC_0008.jpg  Views: 576  Size: 240.7 KB  ID: 8249Click image for larger version.  Name: DSC_0043.jpg  Views: 548  Size: 159.7 KB  ID: 8253Click image for larger version.  Name: DSC_0042.jpg  Views: 526  Size: 177.7 KB  ID: 8252Click image for larger version.  Name: DSC_0034.jpg  Views: 472  Size: 132.1 KB  ID: 8251Click image for larger version.  Name: DSC_0027(2).jpg  Views: 536  Size: 179.5 KB  ID: 8250Click image for larger version.  Name: DSC_0048.jpg  Views: 622  Size: 216.3 KB  ID: 8254

And here is second cut after dust Cyclone:

Click image for larger version.  Name: DSC_0009.jpg  Views: 485  Size: 209.8 KB  ID: 8255Click image for larger version.  Name: DSC_0010.jpg  Views: 532  Size: 198.7 KB  ID: 8256

After these i got my Kress router broken. And the warranty ended 1 month ago :) So i have started at Indiegogo new Campaign to help me, to buy new spindle 3-4kw air cooled from China, because these kress routers are not so powerful to cut MDF and wood at high speeds.

I will be very glad if someone can fund some money at Indiegogo, here is my campaign: CNC Motor Spindle 4kw | Indiegogo