Hey guys, hoping you can help me here. I've been looking to start CAD'ing up the parts I think I will require in my build so I can then fiddle about with them in a nice assembly. Trouble is, I can't seem to find the dimensions of the first part I'm looking at doing . It's the runners here: fl15ca-z0 either FL15CA or FL20CA would be good to get me started. Orrrrr, am I looking at the wrong type of runner and there is a really common one everybody uses that I've missed?
I did try the search button but couldn't see anything for those part numbers.
Are the dimensions further down on the zapp page you linked to no good?
FL15; 47W, 56.2L, 24H
FL20; 60, 70.5, 30 (mm)
The Following User Says Thank You to mocha For This Useful Post:
Ah, so a FL15CA is the same as a CB?
Oh dear I've been staring at it all alongJust... One more project...
Looks like the only difference with CA / CB is top or bottom fix (mounting?).
Last edited by mocha; 24-02-2013 at 12:44 PM.
PM received, digesting it now. Thanks once again!Just... One more project...
CA, CB specifies if the blocks have flanges, so can be mounted from both sides, or no flanges in which case you're limited to one side. Also you can get bearings like those cheaper on Aliexpress, among other places.
Last edited by Jonathan; 24-02-2013 at 05:20 PM.
The Following User Says Thank You to Jonathan For This Useful Post:
By Clem in forum Machine DiscussionReplies: 13Last Post: 26-02-2014, 09:00 PM
By WandrinAndy in forum Gantry/Router Machines & BuildingReplies: 37Last Post: 22-12-2012, 09:34 PM
By Hobgoblin in forum Lead Screws, Nuts & SupportsReplies: 2Last Post: 21-09-2012, 09:31 PM
By cristec in forum Milling Machines, Builds & ConversionsReplies: 4Last Post: 13-08-2012, 06:02 AM
By routercnc in forum Tool & Tooling TechnologyReplies: 20Last Post: 04-08-2011, 11:55 PM